Forum Discussions (4,419)
| Discussions | Replies | Latest Activity |
|---|---|---|
1978 Fender Stratocaster with backbowed neck issues!So I have this 1978 Fender Stratocaster that I am refretting. It has a maple neck. The damn micro tilt after years of use, has kinked the u… Started by Michael Burton in Luthier Talk |
7 |
Sep 11, 2019 Reply by Russell Vance |
Parlor Guitar IDCan anyone discern what company this guitar was made by and possibly timeframe?The body measurements are:Lower bout - 11 7/8"Waist - 6 3/4… Started by Redacted in Luthier Talk |
3 |
Sep 7, 2019 Reply by Ian Pender |
Do you bump customers? And do you tell customers that they've been bumped?Scenario: you're working through the backlog. You get to a Yamaha that's been in the pile for a while. Just as you get it on the bench, you… Started by Keith Somerville in Luthier Talk |
4 |
Sep 7, 2019 Reply by Ian Pender |
Spruce cleats for a repairI can't find any thin spruce to make some cleats, and Stewmac wants to much shipping for a small order. Anyone have a source for some clea… Started by Gary Foreman in Luthier Talk |
6 |
Sep 2, 2019 Reply by Thomas James |
Would you call this neck quartersawn?Hi all! The defendant in question is the neck of a 2018 Eric Johnson signature strat, which was sold to a client as quartersawn (according… Started by Jona Hasan in Luthier Talk |
12 |
Aug 31, 2019 Reply by Russell Vance |
Laying out the headblockGreetings to all I am building a guitar according to "Guitarmaking: Tradition & Technology". In the chapter 'The Neck & The Headpie… Started by Allen L Wall in Luthier Talk |
4 |
Aug 31, 2019 Reply by Allen L Wall |
Harald Petersen classical neck joint ? What type ?I have a UK made Harald Petersen classical that has really high action . Does anyone out there know what type of neck joint Harald would us… Started by toby2 in Luthier Talk |
5 |
Aug 29, 2019 Reply by Mark McLean |
CA in the fret slot?Hello All, I was watching a Stew Mac video the other day, and the fellow that was demonstrating---not Dan Earlywine---said to run some thin… Started by Brian Burns in Luthier Talk |
32 |
Aug 25, 2019 Reply by Glen H |
Epoxy (it looks like) smeared on Lacquer: How/can I remove it?After a one year wait, I finally got my 1935 Kay Kraft built K71 Oahu from Jake Wildwood's shop. The bridge had been replaced like 40 yea… Started by Kerry Krishna in Luthier Talk |
7 |
Aug 22, 2019 Reply by Roger Häggström |
Variations on hide glueHello All, I've always been a fan of hot hide glue since that was the only glue worth using when I started building, back in antediluvian t… Started by Brian Burns in Luthier Talk |
10 |
Aug 21, 2019 Reply by Paul Breen |
© 2025 Created by Frank Ford.
Powered by
