Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Russian 7 string guitarI got this one locally (in Sweden) from a guy who bought it from a Russian. It's old, late 1800'th, most likely made in Russia. Actually qu… Started by Roger Häggström in Luthier Talk |
8 |
Oct 17, 2019 Reply by Len Biglin |
Another guitar, another problem. maple fretboard colour.I bought an '98 Fender American Strat that I like quite a bit. But it has one thing that bugs me. Being 20+ years old, the maple has gotten… Started by Gert van der Does in Luthier Talk |
11 |
Oct 13, 2019 Reply by Russell Vance |
Rosette tile carriageI came up with this jig to do away with the need to chisel a taper on either side of each individual Rosette tile. You load a Rosette log i… Started by Stefan Kelly in Luthier Talk |
4 |
Oct 12, 2019 Reply by Stefan Kelly |
Rosette / circle cutter with presets.I became frustrated with traditional rosette/circle cutters so I came up with this & thought I would share it so you can make your own… Started by Stefan Kelly in Luthier Talk |
0 | Oct 10, 2019 |
Truss rod removalI’m working on a Silvertone with the threaded end of the truss rod broken off. I saw your article about the removable truss rod on a Harmo… Started by Bob Tice in Luthier Talk |
3 |
Oct 8, 2019 Reply by Palle Clausen |
70's 355 pickguard crumblingI have a customer with a guitar that I installed a 355 pickguard on in the mid 70's. He says it is crumbling apart. I've seen this on older… Started by Bob Harris in Luthier Talk |
8 |
Oct 7, 2019 Reply by Bob Harris |
Neck reset on GallagherLooking for advice on resetting the neck on an early 1980s G45. I am treating it as a Martin dovetail joint and am heating with the StewMac… Started by Robert Sherman in Luthier Talk |
4 |
Sep 28, 2019 Reply by Robert Sherman |
Cat urine smellOkay, here is a fun topic. My friend has a situation where a cat peed all over his mandolin. It's not a valuable mando, so no great loss, b… Started by Mark Pollock in Luthier Talk |
3 |
Sep 25, 2019 Reply by Mike Kolb |
A little horror story....A picture's worth a thousand words. The customer complained of very poor string-to-string response from a Fishman UST installed in his Tay… Started by Mike Kolb in Luthier Talk |
8 |
Sep 23, 2019 Reply by Walter W Wright |
Soundhole/bridge repair clampsI've been using regular cam clamps and Ibex clamps for a long time and this morning I've decided I hate them. I've been persevering, but it… Started by Keith Somerville in Luthier Talk |
17 |
Sep 22, 2019 Reply by George Roberts |
© 2026 Created by Frank Ford.
Powered by
