Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Please Help: How do i restore a KTM9 water-based finish polish luster?Hi guys, first-time poster here after having been a visitor to frets.com. Anyways, a few months ago i did a pretty dumb thing and went craz… Started by Quick Question in Luthier Talk |
10 |
Dec 23, 2009 Reply by STGuitarworks |
Can I raise my action without increasing saddle height?The action on my 2 year old HD-28V is very low at 2.8/32 and 1.8/32. It's tolerable since I play mostly fingerstyle, but I can't dig into i… Started by Frank Beard in Luthier Talk |
15 |
Dec 22, 2009 Reply by Frank Beard |
Ca over hide glue ?Hi guys, I was just gluing a tight crack in the front of the saddle slot in an old Martin. I used hot hide glue but I'm not real sure much… Started by Dave Anderson in Luthier Talk |
17 |
Dec 21, 2009 Reply by Dave Anderson |
Carpenter jack clamp--more capacityI recently picked up a Baggs radius pickup for my bandolim (Brazilian mandolin) but the clamp for the external carpenter's jack (hardware l… Started by LARRY KLOSE in Luthier Talk |
4 |
Dec 19, 2009 Reply by LARRY KLOSE |
DeWalt Alarm ClockSo at 4:45 this morning I was awoken by a whirring sound, which was far too trebly for a truck idling in the alley. I followed my ears two… Started by Rick Gentry in Luthier Talk |
0 | Dec 19, 2009 |
Cleaning old Brass Machine HeadsDoes anyone have a good solution to restore a set of very old very tarnished Tuners,they are almost black.Cheers Started by Kelvin Monaghan in Luthier Talk |
4 |
Dec 18, 2009 Reply by Kelvin Monaghan |
Cedar Top Bridge Re-GlueThis Cedar Top Seagull came to the bench with the bridge already off and quite a hump where it once sat. The guitar was left in the trunk f… Started by Lee Brown in Luthier Talk |
7 |
Dec 18, 2009 Reply by Matt Haugen |
Gear needed for F4As a new member - hello luthiers. I'm the proud owner of a 1922 F4 with Cremonia sunburst that I purchased from the original owner maybe 25… Started by Tim Noble in Luthier Talk |
4 |
Dec 18, 2009 Reply by Tim Noble |
B string noiseI recently picked up a winner of a Seagull guitar. Mini- jumbo type. All is well except some odd ringing from the B string when I strum or… Started by Wayne Walker in Luthier Talk |
12 |
Dec 17, 2009 Reply by Ned Knepp |
how do manufacturers appropriately grease there pots for smoth actionwhat do manufacturers use to appropriately grease or oil there pot shafts to make them roll nicely not loose not to tight ? Started by FRANK in Luthier Talk |
6 |
Dec 17, 2009 Reply by Rob Mercure |
© 2026 Created by Frank Ford.
Powered by
