Forum Discussions (4,417)
| Discussions | Replies | Latest Activity |
|---|---|---|
Need to find a good nickel plating service, for vintage partsDoes anyone know of one, who will do small quantities? I have a '34 Epiphone archtop project: the original tailpiece has lost all of it's n… Started by Dave Richard in Luthier Talk |
5 |
Mar 28, 2018 Reply by Dave Richard |
Fast and dirty wood repairs.fi.jpg Started by Kerry Krishna in Luthier Talk |
4 |
Mar 19, 2018 Reply by Paul Breen |
The little "finds" are the best.I've always casually wondered where someone could get brad-point drills under 1/8" (as the need would arise from time to time). Then, a w… Started by Mike Kolb in Luthier Talk |
2 |
Mar 18, 2018 Reply by Robbie Collins |
Making custom fit internal bridge gluing caulsHi all, how do you guys approach making custom bridge gluing cauls for bridge plates and cauls to go around braces? How do you trace the p… Started by Mark in Luthier Talk |
10 |
Mar 15, 2018 Reply by Mark |
Golden Age slotted head tuner bushingsI have started to add 12 vintage style bushings to the Stewmac Golden Age slotted head tuners. It works great and have a couple of advantag… Started by Roger Häggström in Luthier Talk |
0 | Mar 15, 2018 |
Fixing a new bridge to a damaged laminated topHi all, I read a comment by Frank Ford regarding fixing a bridge using epoxy. So if you see this Frank or indeed anyone who has good advic… Started by Alan Osborne in Luthier Talk |
11 |
Mar 13, 2018 Reply by Alan Osborne |
Piezo question: How loud is a K and K Mini by itselfHow loud is a K and K Mini with say, only a 6 foot chord, compared to a Humbucking pickup with both being plugged straight into an amp? Is… Started by Kerry Krishna in Luthier Talk |
4 |
Mar 12, 2018 Reply by LARRY KLOSE |
Possible to repair sunken top through F-holes?Hi, everyone. A customer has brought a 1940s Gibson L-7 which has a top that is somewhat sunken. Since it has no pickup hole to work thro… Started by Eric Gleason in Luthier Talk |
2 |
Mar 12, 2018 Reply by Len Biglin |
Hardware : BIGSBY Retrofit Solutions by TOWNERLuthiers & Guitar Techs, back in 2011 I introduced to market the down tension bar to retrofit Bigsby B3's and B6's (with 'ex-short' hin… Started by Christian J Towner in Metalworking, Machining, Tool & Fixture Making for Luthiers |
3 |
Mar 10, 2018 Reply by Christian J Towner |
o.w. appleton - the original "inventor" of the les paulthis dude was pretty smart. check this fret saw out! behold the awesomeness: apparently this dude also invented the aluminum neck guit… Started by casey campbell in Luthier Talk |
18 |
Mar 9, 2018 Reply by Mark Pollock |
© 2025 Created by Frank Ford.
Powered by
