Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Vintage Barcus Berry AdhesiveRe-mount an old BB pickup circa 70's. What was the original, or a well working, adhesive solution? It the little rectangular block model. T… Started by Thomas James in Luthier Talk |
9 |
Jul 13, 2017 Reply by Thomas James |
Washburn saddle transducer glued in?Anyone come across this? Called Washburn but, "tech guy is on vacation". (sounds nice) Started by David Farmer in Luthier Talk |
5 |
Jul 12, 2017 Reply by Claus Holm Jensen |
Trizact Sanding DiscsSo we do a lot of renovation work, especially when business is slow. I have done my fair share of finish repairs resulting in a claw shaped… Started by MARK HARRIS in Luthier Talk |
0 | Jul 7, 2017 |
Martin sanding info...I obtained this from Dan Lucas, of a builders resource site. He lives near the Martin factory and shared it with permission, so I'm doing t… Started by Mike Kolb in Luthier Talk |
2 |
Jul 6, 2017 Reply by Frank Ford |
Useless or usefulMost high-end acoustic guitars have individual fitted bridge pins, here is a small tool I made on a laser cutter for keeping track of your… Started by Claus Holm Jensen in Luthier Talk |
10 |
Jul 5, 2017 Reply by Claus Holm Jensen |
Workshop job chartsWondering today about making up some kind of whiteboard/pin board thing so I can see at a glance what instruments are in the shop and what… Started by Keith Somerville in Luthier Talk |
2 |
Jul 5, 2017 Reply by Keith Somerville |
Plastic bag mask for lacquer overspray?I saw a photo of someone doing it and wondered if others are. Sure would be a time saver when just doing a neck touchup. Masking a body wi… Started by David Farmer in Luthier Talk |
7 |
Jul 2, 2017 Reply by Russell Vance |
Pricing stainless steel fret dressI don't do this, but I've started wondering of late if I ought to charge more for dressing stainless steel frets. The last job, an old Toka… Started by Keith Somerville in Luthier Talk |
37 |
Jun 30, 2017 Reply by Keith Somerville |
Laser engraved Gretsch backplateI need to make a new backplate for a vintage Gretsch Country Gentleman I took a photo of the old backplate then very carefully traced out t… Started by Claus Holm Jensen in Luthier Talk |
1 |
Jun 29, 2017 Reply by Paul Verticchio |
Problem: lacquer racking along fret slot on maple neck re-fretHowdy, I'm working on a re-fret of my made-in-Japan Fender Malmsteen Strat, I've removed the frets without issue, used a triangle file to… Started by John Cartwright in Luthier Talk |
43 |
Jun 25, 2017 Reply by Walter W Wright |
© 2026 Created by Frank Ford.
Powered by
