Forum Discussions (4,422)
| Discussions | Replies | Latest Activity |
|---|---|---|
Martin mahogany back separation- dried out.Greetings all- the new guy here- just discovered this forum and have tons of stuff to discuss. OK- first off, got a mahogany bodied Martin… Started by christopher smith in Luthier Talk |
14 |
Mar 3, 2017 Reply by Paul Breen |
Steaming a Martin bolt-on .When drilling steam holes for neck removal on a Martin D-1R , is it the same procedure as a dovetail ? It is a one piece mahogany neck , wi… Started by Len Biglin in Luthier Talk |
7 |
Feb 26, 2017 Reply by Christopher Parker |
color matchingHey all, I tried my first color match the other day on the back of an acoustic and it went better than I had expected. I used this StewMa… Started by Jim Figurski in Luthier Talk |
3 |
Feb 24, 2017 Reply by Greg Mirken |
Can this neck be saved?Hello all, I am new to the forum and currently working on my third build. I got too aggressive sanding the neck at the nut on the treble si… Started by John Gibson in Luthier Talk |
2 |
Feb 21, 2017 Reply by Russell Vance |
Beveled tail blockI'm always looking for something new for me to try. I had a classical guitar in for repair, the guitar had been dropped and the the top was… Started by Roger Häggström in Luthier Talk |
18 |
Feb 19, 2017 Reply by Robbie Collins |
Need air filtration system for my 1000 SF shopThe dust in here is amazingly bad, and I am not talking sawdust. I remember the electrostatic Oreck filters and such. I am not sure how to… Started by Kerry Krishna in Luthier Talk |
5 |
Feb 15, 2017 Reply by Brian Burns |
OldguitarBeen busy in this forum showing off some things I do. The proof is in the pudding. Here are some slides of the latest finished "GammelGura"… Started by Roger Häggström in Luthier Talk |
9 |
Feb 13, 2017 Reply by Roger Häggström |
Is a neck rest necessary?I was wondering if a guitar neck rest like the rock-n-roller from StewMac, or the kind that Dave from Dave's world of fun stuff is necessar… Started by Jim Figurski in Luthier Talk |
13 |
Feb 13, 2017 Reply by Hesh Breakstone |
Fret Tang Nipper Substitute?When undercutting the fret wire on a bound neck, I have used a jeweler's saw to make the cuts, and a fine pillar file to clean up the cuts.… Started by George Roberts in Luthier Talk |
9 |
Feb 10, 2017 Reply by Howard Klepper |
Looking for thread on removing/redoing Waverley Tuner buttons...Since search function is no longer working, I am just trying to find that old thread for some answers on a thread on Collings Forum. Any he… Started by Kerry Krishna in Luthier Talk |
7 |
Feb 7, 2017 Reply by Kerry Krishna |
© 2026 Created by Frank Ford.
Powered by
