Forum Discussions (4,417)
| Discussions | Replies | Latest Activity |
|---|---|---|
Recent Regal resonators...Glue used for neck/body...I've got 2 Regal resonators in the shop...One bass and one guitar....The guitar has a heelblock separation at the on the joined seem, that… Started by thefishinmusician in Luthier Talk |
1 |
Feb 18, 2011 Reply by William F.Eden |
Regluing a bridge with some sort of ledge on it?Hello, So I have a guitar in for repair that the bridge was lifting off. Once I got the bridge off I noticed this ledge around the perime… Started by Justin in Luthier Talk |
8 |
Feb 16, 2011 Reply by Bruce Herrmann |
Endgrain Staining on old Maple headstock - RFCHowdy out there in radio land, Anybody got any miracle cures for this situation ? It looks pretty permanent to me. The instrument sat i… Started by Paul Lupus in Luthier Talk |
1 |
Feb 15, 2011 Reply by FRANK |
Martin bridge at wrong positionI have seen it many times. The bridge is located at the wrong place, and the guitar has a very bad intonation. There are three ways to solv… Started by Andras Novak in Luthier Talk |
8 |
Feb 13, 2011 Reply by Charlie Hoffman |
guitar's worth..?Hi, this is not a luthier-type question, but here goes: How can one tell a guitar's worth? I always seem to be checking-out guitars (usuall… Started by Arthur Sweeney in Luthier Talk |
5 |
Feb 11, 2011 Reply by Ned Knepp |
CNC router servicesIs there anyone in the bay area that does cnc routing for mandolin plates? Started by Rodney Smith in Luthier Talk |
3 |
Feb 10, 2011 Reply by Doug T |
Decent low-priced 12-string acousticHi, I am looking for a new 12-string acoustic guitar. Can anyone recommend one that is less than $300 but still good quality, that won't r… Started by Arthur Sweeney in Luthier Talk |
9 |
Feb 10, 2011 Reply by Jeffrey L. Suits |
Archtop tail piece damage: Binding failure or?I have been collecting 1930's Kay Kraft two points for close to a year now. Each one of the seven I have bought has had it's own problems.… Started by Kerry Krishna in Luthier Talk |
16 |
Feb 9, 2011 Reply by Kerry Krishna |
stripped truss rod threadsHey guys! I've got a '97 Pbass with stripped truss rod threads. (I'm sure its the rod and not the nut - I've tried several, along with spa… Started by Ted Kritikos in Luthier Talk |
1 |
Feb 9, 2011 Reply by thefishinmusician |
Paint ChipI have an older Washburn electric (actually my son's)..it is a metalflake blue with lots of metalflake..it recently had a big chip knocke… Started by DP in Luthier Talk |
5 |
Feb 8, 2011 Reply by Donald A. Fortune |
© 2025 Created by Frank Ford.
Powered by
