Forum Discussions (4,417)
| Discussions | Replies | Latest Activity |
|---|---|---|
Gaffer's tape for fixing casesFor covering bare wood on a case, gaffer's tape is the best I've found. It's durable and blends in with the tolex fairly well. Is there a… Started by Darryl Hattenhauer in Luthier Talk |
0 | Mar 1, 2011 |
Filling a soundboard troughAlthough this MK IV might prove to be a lost cause, I bought it as a project because I hope it's a padouk body with a cedar top. http://cg… Started by Darryl Hattenhauer in Luthier Talk |
4 |
Mar 1, 2011 Reply by Darryl Hattenhauer |
Help making fret slotting templates for my circular saw sled....I was recently able to make a sled for my table top circular saw. I bought the StewMac blade also, and have 1/4" acrylic material ready t… Started by Kerry Krishna in Luthier Talk |
3 |
Mar 1, 2011 Reply by Ken in Dallas |
need Gurian guitar photo for Premier Guitar, Bob Taylor columnGreetings fellow guitarists: I'm searching for a photo of a Gurian guitar to go with a Bob Taylor column I'm editing for our April issue (h… Started by Andy Ellis in Luthier Talk |
5 |
Feb 28, 2011 Reply by Frank Ford |
Vintage Cloth Wire - Red, Green, other colors?Howdy, I am looking for a source of red, green, blue, etc.. cloth wire. I can find plenty of black, white, and yellow. See attached phot… Started by Tom Krebs in Luthier Talk |
5 |
Feb 28, 2011 Reply by Tom Krebs |
Ovation finish dilemmaWe have a 'older' Ovation, model AA14-1, the finish has deep cracks all over the soundboard. It should be refinished, but, paint stripper… Started by Chris Rochow in Luthier Talk |
2 |
Feb 28, 2011 Reply by Tim Mace |
apply titebond to damp or dry wood ?????i read somewhere that you should apply titebond to water soaked timber... can't recall where i saw it.. i have always gone the dry route..… Started by nick-p in Luthier Talk |
6 |
Feb 27, 2011 Reply by nick-p |
Gibson J100 with cracked bridgeGood evening. I consider purchasing 15-16 years old Gibson guitar with a very nice voice. The only problem is that she has a cracked bridge… Started by Alex in Luthier Talk |
10 |
Feb 27, 2011 Reply by Chris Rochow |
Crack in top that needs a splintHello again, I have another problem that I would like to get some suggestions about. The problem is I have a guitar in for repair that ha… Started by Justin in Luthier Talk |
7 |
Feb 26, 2011 Reply by Paul Breen |
Gibson LGO with bridge lifting problemHello all! So I just posted about another guitar that I was fixing the bridge on. And in comes another that I have questions about. The g… Started by Justin in Luthier Talk |
13 |
Feb 24, 2011 Reply by Jeffrey L. Suits |
© 2025 Created by Frank Ford.
Powered by
