Forum Discussions (4,418)
| Discussions | Replies | Latest Activity |
|---|---|---|
Kel Kroydon tenor banjo repairsWell, the tiple turned out really well, my wife's aunt and cousin were very happy with it. Now I have a new task. My wife's grandmother b… Started by Mark Pollock in Luthier Talk |
6 |
Aug 4, 2010 Reply by Pierre-Antoine Roiron |
60's Fender Villager 12 string Acoustic Options?I got this Fender Villager, late 60's 12 string with a bolt on neck. Owner, who bought new' said a 'friend' thought the screws in the plate… Started by Jerry Ryan in Luthier Talk |
19 |
Aug 3, 2010 Reply by Gregory Hites |
Truss Rod for Hawaiian Lap Guitar?I have an old Maui Maid acoustic Hawaiian lap steel guitar. It has a round guitar neck with a vee profile. It came to me without a fretboar… Started by Russ Morin in Luthier Talk |
5 |
Aug 3, 2010 Reply by Rory |
1st & 6th strings weakI replaced a bridge on a guitar that I had made using the same under-saddle Fishman pickup (Martin Thinline 332). On the old bridge it work… Started by Jack Lord in Luthier Talk |
5 |
Aug 2, 2010 Reply by Jack Lord |
Martin DX-1 Glue?Lady brought me a Martin DX-1. The back and top seams are completely blown out from some type of trauma. These have composite back and side… Started by Tom Krebs in Luthier Talk |
7 |
Aug 2, 2010 Reply by Pierre-Antoine Roiron |
Wiring management for guitar electronics questionI'm building my first electric archtop with two humbuckers, a 3-way switch and separate tone and volume pots for each humbucker. How does… Started by Richard Smith in Luthier Talk |
3 |
Aug 1, 2010 Reply by Richard Smith |
Getting started...Hello, I am sure I am not the first person to ask the following question, but at the risk of being redundant...here goes. I recently starte… Started by Mike in Luthier Talk |
2 |
Jul 30, 2010 Reply by Ned Knepp |
Glue for bindingI am about to install a new binding on an old Hagstrom Jimmy. I have bought the binding from StewMac. I have tried super glue, but no succe… Started by Bob Steinarsson in Luthier Talk |
3 |
Jul 30, 2010 Reply by Pierre-Antoine Roiron |
Chip Repair on a Gibson Gold Top?Hey everyone! I'm hoping I can get some advice on repairing a major chip out of the top of a Gibson Reissue Gold Top. I am a Refret guy… Started by Mark Porter in Luthier Talk |
4 |
Jul 29, 2010 Reply by Gregg Sprague |
I'm finally gonna do it......after nine or so years doing repairs, I'm finally going to build a steel string. I bought Guitarmaking: Tradition and Technology and it… Started by Ted Kritikos in Luthier Talk |
8 |
Jul 29, 2010 Reply by Ned Knepp |
© 2025 Created by Frank Ford.
Powered by
