Forum Discussions (4,417)
| Discussions | Replies | Latest Activity |
|---|---|---|
Fender Biflex truss rod replacementI've got a non-functional truss rod on a 1994 Fender Strat here. I've done the whole 'pull the walnut plug and replace the truss rod nut' s… Started by Ian Pender in Luthier Talk |
3 |
Oct 26, 2018 Reply by Charlie Sanders |
Problem bending sidesI just attempted to bend some Mahogany sides, with a cutaway, thickened to .87-.90 in a Fox style bender. When I took them out there was wh… Started by Charlie Sanders in Luthier Talk |
7 |
Oct 26, 2018 Reply by Charlie Sanders |
looking for binding source for 74 guildHey all Im looking for binding used on an aging 74' Guild F50 for the neck its w/b/w/b/w any leed wound be most appreciated Started by peter meyer in Luthier Talk |
1 |
Oct 25, 2018 Reply by Mike Kolb |
Oud neck break: opinions soughtHi, all! A customer of mine brought this back from Egypt. Unfortunately, and inevitably, it was damaged in the hold of the plane. Wondering… Started by Keith Somerville in Luthier Talk |
6 |
Oct 22, 2018 Reply by Keith Somerville |
Resource for wholesale celluloid tortoise?I wasn’t seeing celluloid tortoise sheet stock, now a couple vendors have it for sale at retail prices. While it’s available I’d like to gr… Started by Mike Cornwall in Luthier Talk |
2 |
Oct 21, 2018 Reply by Mike Cornwall |
25' 00-21 restoration. Thanks for the add !Thought I'd share this rebuild. She came out wonderfully. Just tweaking a few bar frets to finish off. Came to me in this state, fished out… Started by Dave Griffin in Luthier Talk |
0 | Oct 20, 2018 |
Gluing bowed fret board to neckShould I attempt to straighten a slightly bowed fretboard (new fretboard) prior to gluing. The convex side will be glued to the neck. I've… Started by Paul Said in Luthier Talk |
1 |
Oct 19, 2018 Reply by Russell Vance |
Climate ControlI live in northeast Tennessee, and I don't have central heating and air in my house. Fall and winter are approaching, and I'm wondering wha… Started by CAcousticM in Luthier Talk |
5 |
Oct 14, 2018 Reply by CAcousticM |
Dead flat V/S relief.I have read that such athoritiypes believe in a flat neck V/S relief...Lookin' to see what others have to say about this subject..My experi… Started by thefishinmusician in Luthier Talk |
20 |
Oct 11, 2018 Reply by Greg Miller |
Premature fret wear?Greetings, I have had two customers tell me they experienced surprisingly quick fret wear. The instruments in question were dulcimers I bui… Started by Doug Berch in Luthier Talk |
10 |
Oct 8, 2018 Reply by Doug Berch |
© 2025 Created by Frank Ford.
Powered by
