FRETS.NET

Tim Mace's Discussions (462)

Discussions Replied To (448) Replies Latest Activity

"That way 2!"

Tim Mace replied Oct 19, 2011 to tail piece buckled 12 string top

11 Oct 19, 2011
Reply by Ned Knepp

"there's a lot more detail image wise...I found the news 2004 to be a good example...…"

Tim Mace replied Oct 17, 2011 to Arch top guitar to pin bridge conversion......

12 Oct 17, 2011
Reply by Ned Knepp

"Either blunt force trauma or way overtuning or both.....yuck...If I were as wood sav…"

Tim Mace replied Oct 17, 2011 to tail piece buckled 12 string top

11 Oct 19, 2011
Reply by Ned Knepp

"X would appear to be the most likely to succeed.Check out Stefan Sobell's site for c…"

Tim Mace replied Oct 17, 2011 to Arch top guitar to pin bridge conversion......

12 Oct 17, 2011
Reply by Ned Knepp

"What type inserts for the bolts are you using?Sounds like worthwhile excersize......…"

Tim Mace replied Oct 16, 2011 to Arch top guitar to pin bridge conversion......

12 Oct 17, 2011
Reply by Ned Knepp

"Keep the one you have and get some new material to get good at it...since you're low…"

Tim Mace replied Oct 14, 2011 to proper way to shave-down saddle to lower action

38 Oct 16, 2012
Reply by Paul Verticchio

"And isn't trussrod replacement along the lines of rootcanaling?"

Tim Mace replied Oct 10, 2011 to Truss rod pushed down into the guitar neck

26 Oct 11, 2011
Reply by Michael P. Lemieux

"I also outsource root canals.I assumed the Oscar was yours but good luck anyway!"

Tim Mace replied Oct 10, 2011 to Truss rod pushed down into the guitar neck

26 Oct 11, 2011
Reply by Michael P. Lemieux

"...pretty sure mine has been bastardized..MOP dot dead center rear hides a screw whi…"

Tim Mace replied Oct 10, 2011 to Different saddle height...

14 Oct 10, 2011
Reply by Tim Mace

"Ebony would be my choice hard as it is and stable."

Tim Mace replied Oct 7, 2011 to If you could choose ANY wood to make a bridge...

12 Oct 8, 2011
Reply by Paul Hostetter

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service