FRETS.NET

William F.Eden's Discussions (620)

Discussions Replied To (601) Replies Latest Activity

"Having said that you  realy don't have to take the hole back off to do that repair t…"

William F.Eden replied Sep 21, 2011 to How to remove 4/4 violin back

7 Sep 21, 2011
Reply by William F.Eden

"That will work just fine Jerry."

William F.Eden replied Sep 20, 2011 to How to remove 4/4 violin back

7 Sep 21, 2011
Reply by William F.Eden

"   I just take a thin spachel and heat it on the torch and run it around were the ba…"

William F.Eden replied Sep 20, 2011 to How to remove 4/4 violin back

7 Sep 21, 2011
Reply by William F.Eden

"Well i think  you are on the right track as the brace you are showing is to  far bac…"

William F.Eden replied Sep 4, 2011 to Buckling Top Problem

1 Sep 4, 2011
Reply by William F.Eden

"Well for what it's worth I just put one drop of THICK C.A glue on one side just in t…"

William F.Eden replied Aug 31, 2011 to Dobro screens

12 Sep 2, 2011
Reply by Rory

"I would use thin Supper glue.   I use it on all my repaired violin cracks.and it wor…"

William F.Eden replied Aug 29, 2011 to Can Titebond be used to repair joints previously glued with PVA.

13 Sep 4, 2011
Reply by Magnus Hultin

"Like Howard said you should not have to use the saw.If you take the bone down fairly…"

William F.Eden replied Jul 30, 2011 to Cutting nut slots accurately

24 Aug 6, 2011
Reply by Mark Pollock

" Thick Super glue should do it ."

William F.Eden replied Jul 26, 2011 to Gibson Fret Nibs

4 Jul 26, 2011
Reply by Scott Wackerman

"p.s don't use  filler again........."

William F.Eden replied Jul 18, 2011 to blistered lacquer: filler problem?

7 Jul 19, 2011
Reply by Phil Keener

"Well STG;;; I would rather you not includ me in the ones that think your repair will…"

William F.Eden replied Jun 11, 2011 to Broken headstock re-reglue.

20 Jun 16, 2011
Reply by STGuitarworks

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service