FRETS.NET

Thomas James's Discussions (607)

Search Forum

View

Discussions Replied To (556) Replies Latest Activity

"Peterson VS2 on my bench. Works very well. I have a clip attachment for it, and the…"

Thomas James replied Mar 28, 2013 to What kind of tuner should I have

 30 Apr 19, 2013
Reply by Robbie Collins

"This is the hot plate idea: It will heat the knives, boil water, heat your glue…"

Thomas James replied Mar 21, 2013 to Heater for Spatulas, Putty Knives, and Palette Knives.

 6 Mar 22, 2013
Reply by Robbie Collins

"You can get a 600W dimmer at H Depot for about $9. I use one of these on my electric…"

Thomas James replied Mar 17, 2013 to Heater for Spatulas, Putty Knives, and Palette Knives.

 6 Mar 22, 2013
Reply by Robbie Collins

"Congratulations Hesh and Associates!"

Thomas James replied Mar 17, 2013 to Thrilled To Announce...

 22 Mar 20, 2013
Reply by Hesh Breakstone

"Looks good."

Thomas James replied Mar 12, 2013 to Cutting 3ply pick guard material ?

 16 Mar 13, 2013
Reply by William F.Eden

"Mark's suggestion of removing the back is the way. His comments on what would happen…"

Thomas James replied Mar 8, 2013 to Shiraki Brace Repair..?

 11 Mar 8, 2013
Reply by Andrew

"Is there even a small amount proud of the hole? Maybe a pin vise could grab it?"

Thomas James replied Mar 7, 2013 to RCA Plug extraction

 14 Mar 8, 2013
Reply by RETROROD

"I have had custom configurations made by Pickguardian.com.  I would ask if they can…"

Thomas James replied Mar 7, 2013 to Cutting 3ply pick guard material ?

 16 Mar 13, 2013
Reply by William F.Eden

"Make a pattern form 1/2" stock. Trim blank to rough size with a band saw or coping s…"

Thomas James replied Mar 7, 2013 to Cutting 3ply pick guard material ?

 16 Mar 13, 2013
Reply by William F.Eden

"From what I'm reading, sounds like you might experience remorse after purchase. This…"

Thomas James replied Mar 6, 2013 to Shiraki Brace Repair..?

 11 Mar 8, 2013
Reply by Andrew

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service