FRETS.NET

Bob Steinarsson's Discussions (118)

Search Forum

View

Discussions Replied To (88) Replies Latest Activity

"Lampblack works well in the epoxy that I use. It may work well in other finishes as…"

Bob Steinarsson replied Mar 14, 2014 to Drop Filling Fender Poly Finish - Invisible Repair on 1978 Tele Deluxe Possible?

 8 Mar 17, 2014
Reply by Robbie Collins

"Standard buffing wheel on flexible shaft (Dremel) with scratch remover from the near…"

Bob Steinarsson replied Mar 13, 2014 to Fretwork made easier

 22 Mar 16, 2014
Reply by Len Biglin

"If the washer trick doesn't work, see this link: http://fretsnet.ning.com/forum/topi…"

Bob Steinarsson replied Jan 24, 2014 to Clamping a neck into a back-bow

 24 Feb 5, 2014
Reply by eliya

"I think the string spacing is just as interesting as the wire "

Bob Steinarsson replied Nov 23, 2013 to Another hall of shame photo

 8 Nov 24, 2013
Reply by Randall Curtis Bowman

"See the following thread: http://fretsnet.ning.com/forum/topics/noobish-question?com…"

Bob Steinarsson replied Aug 10, 2013 to Gibson Electric Neck problem.

 4 Aug 11, 2013
Reply by Michael Tulloch

"I don't think a couple of days will tell you anything. The neck may want to go back…"

Bob Steinarsson replied May 25, 2013 to Noobish Question... Truss rod tension before FB level?

 13 Jul 15, 2019
Reply by Gert van der Does

"Any iron will do. As long as the frets are still there, don't tell your wife, and sh…"

Bob Steinarsson replied May 24, 2013 to Noobish Question... Truss rod tension before FB level?

 13 Jul 15, 2019
Reply by Gert van der Does

"I have done this on different guitars with great success, but you are right, Kerry,…"

Bob Steinarsson replied May 24, 2013 to Noobish Question... Truss rod tension before FB level?

 13 Jul 15, 2019
Reply by Gert van der Does

"Depending on the glue used under the FB, heating the neck under tension may straight…"

Bob Steinarsson replied May 23, 2013 to Noobish Question... Truss rod tension before FB level?

 13 Jul 15, 2019
Reply by Gert van der Does

"Baking soda (bicarbonate) is excellent, but don't forget to grind it to a fine powde…"

Bob Steinarsson replied Nov 5, 2012 to Nut Slot Repair

 13 Nov 5, 2012
Reply by Rob Beck

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service