FRETS.NET

David Collins's Discussions (126)

Discussions Replied To (124) Replies Latest Activity

"Abrade and epoxy. If there's a layer of glue on top of the composite / resin layup r…"

David Collins replied Dec 8, 2013 to What kind of glue should I use on this repair?

18 Dec 29, 2013
Reply by Ron Ellison

"I guess all that I could add then is that if this job came in to our shop I would wr…"

David Collins replied Dec 1, 2013 to 1945 D-18 bridge ( let's get it right the 4th? time!)

19 Dec 13, 2013
Reply by David Farmer

"From as far as I can see in the photos through my phone, the prior top patch attempt…"

David Collins replied Dec 1, 2013 to 1945 D-18 bridge ( let's get it right the 4th? time!)

19 Dec 13, 2013
Reply by David Farmer

"The magic number is 81. We use heat, very carefully controlled. We have a couple of…"

David Collins replied Nov 26, 2013 to Loose binding at waist

11 Nov 30, 2013
Reply by Kerry Krishna

"I use the OlloClip for my 4s. It has wide angle, fisheye, and obviously macro. No su…"

David Collins replied Nov 26, 2013 to Seating loose frets, for your viewing pleasure...

14 Nov 27, 2013
Reply by Ned Knepp

"Thanks Frank - this is the first video I've tried shooting, editing, and uploading e…"

David Collins replied Nov 26, 2013 to Seating loose frets, for your viewing pleasure...

14 Nov 27, 2013
Reply by Ned Knepp

"There are a lot of variables here that make this question less simple than a single…"

David Collins replied Nov 25, 2013 to Measuring the neck set angle (with or without frets installed)

9 Nov 27, 2013
Reply by Peter Poyser

"This job isn't always pretty."

David Collins replied Nov 25, 2013 to Seating loose frets, for your viewing pleasure...

14 Nov 27, 2013
Reply by Ned Knepp

"Tomahawk aside, cold chisel removal has it's place. This instrument for example, wit…"

David Collins replied Nov 24, 2013 to Cold bridge removal, chisel style..?

39 Nov 24, 2013
Reply by Russell Vance

"Hmmm, haven't tried that one yet. If we do, I'll be sure to catch it on video."

David Collins replied Nov 22, 2013 to Cold bridge removal, chisel style..?

39 Nov 24, 2013
Reply by Russell Vance

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service