Paul Verticchio's Discussions (1,304)

Discussions Replied To (1298) Replies Latest Activity

"If the neck has fall away engineered into the highest frets (14-22) it MAY create th…"

Paul Verticchio replied Jul 25 to Neck Angle

8 Jul 26
Reply by Russell Vance

"I think your humility clouded your observations. That’s a B+++ job for a first time…"

Paul Verticchio replied Jun 11 to Rotted binding on a Gretsch 6122

13 Jun 12
Reply by Dave Richard

"Hi Tom. A major consideration should be the probability of the necks needing complet…"

Paul Verticchio replied Mar 3 to The Most Difficult Neck Reset .. need ideas

18 Mar 18
Reply by onewent

"Compression fretting will not provide the desired results. The guitar requires, at m…"

Paul Verticchio replied Mar 3 to Compression Fretting with bar frets

3 Mar 8
Reply by Greg Mirken

"That gauge of strings should cause no temporary or permanent performance issues to y…"

Paul Verticchio replied Mar 3 to 12 string string tensions

3 Mar 5
Reply by Brian T. Williams

" Hi Len. Swap ou…"

Paul Verticchio replied Jul 2, 2020 to Gibson L5 tailpiece .

2 Jul 3, 2020
Reply by Len Biglin

"The brake [sic] repair might also require a new rotor and pads. I just couldn’t res…"

Paul Verticchio replied May 24, 2020 to bad brake!! Oh SNAP!

3 May 29, 2020
Reply by peter meyer

"Hello Hesh and Rusty. Your greetings made my day. Everything is going as well as it…"

Paul Verticchio replied Jan 26, 2020 to Saddle Height

22 Jan 26, 2020
Reply by Paul Verticchio

"Hi mr smits. I see two major problems: The first is: your saddle should have a roun…"

Paul Verticchio replied Jan 23, 2020 to Saddle Height

22 Jan 26, 2020
Reply by Paul Verticchio

"If the neck was made after 1983, the frets were installed in the usual way using an…"

Paul Verticchio replied Dec 6, 2019 to Sideways - out Fender frets with a bound neck...

4 Dec 7, 2019
Reply by thefishinmusician


© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service