FRETS.NET

Brian Burns's Discussions (100)

Search Forum

View

Discussions Replied To (71) Replies Latest Activity

"Hello Rusty, I have a large drawer dedicated to Micro Mesh, but find that Assilex is…"

Brian Burns replied Dec 15, 2016 to Rosewood fingerboard finish?

 15 Dec 23, 2016
Reply by Richard Bales

"Hello Ron, You are right about steel wool. I used to use the finest grade to apply w…"

Brian Burns replied Dec 14, 2016 to Rosewood fingerboard finish?

 15 Dec 23, 2016
Reply by Richard Bales

"Hello Russell, Thanks for your excellent answer! "let the oil/conditioner stand on t…"

Brian Burns replied Dec 14, 2016 to Rosewood fingerboard finish?

 15 Dec 23, 2016
Reply by Richard Bales

"Hello again Glen, I finally settled on plain old shellac, with all its problems. Now…"

Brian Burns replied Dec 13, 2016 to CA pore fill?

 4 Dec 13, 2016
Reply by Brian Burns

"Thanks Glen, In my dozen year search for a clear pore filler---and trying at least a…"

Brian Burns replied Dec 13, 2016 to CA pore fill?

 4 Dec 13, 2016
Reply by Brian Burns

"Hello Rusty, Thanks for the suggestion! I'll do a bit of a test to see if CA sticks…"

Brian Burns replied Dec 13, 2016 to CA proof tape?

 12 Dec 20, 2016
Reply by Roger Häggström

"Hello Hesh, By sheer happenstance my dentist here in Fort Bragg CA was a student of…"

Brian Burns replied Dec 8, 2016 to Cheap curing light for dental stuff?

 2 Dec 8, 2016
Reply by Brian Burns

"Hello Ron and Paul, Thanks for the suggestions (:->)...I think I might be able to…"

Brian Burns replied Dec 6, 2016 to CA proof tape?

 12 Dec 20, 2016
Reply by Roger Häggström

"Hello Sylvan, Thanks for the quick reply! I've built four three axis routers over th…"

Brian Burns replied Dec 5, 2016 to CNC router experience?

 2 Dec 5, 2016
Reply by Brian Burns

"Hello Calamity, Thanks for reminding me to get some utility knife blades to make int…"

Brian Burns replied Nov 10, 2016 to Frank's razor blade scraper---a variation

 5 Dec 2, 2016
Reply by peter meyer

RSS

Members

© 2023   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service