FRETS.NET

Eugen C's Discussions (64)

Discussions Replied To (54) Replies Latest Activity

"Thank you for your quick answer. Regarding the top/side regluing, I can't access th…"

Eugen C replied Jul 21, 2010 to Another guitar, another problem.... top and bridge partialy unglued

5 Jul 21, 2010
Reply by nathan clark

"Hello again :) After more than a month I can tell you that I am very glad with my S…"

Eugen C replied Jul 20, 2010 to 12 string Sigma with bellied top

29 Jan 24, 2016
Reply by Andrew

"A bass reduced to the max is a bass without any strings. Just jocking, no offence pl…"

Eugen C replied Jul 12, 2010 to Just because, that's why :)

17 Jul 18, 2010
Reply by Mac Walker

"http://www.graphtech.com/product-191-2/"

Eugen C replied Jul 10, 2010 to '61 to '66 Hummingbird Ceramic saddle - HELP !!!!!!

3 Jul 12, 2010
Reply by Charlie Hoffman

"On my Ibanez there were no inserts under the bridge. The thread for the screws was i…"

Eugen C replied Jul 8, 2010 to Should I replace the adjustable bridge on my 1966 Gibson J-50?

25 Jul 28, 2013
Reply by Robbie Collins

"I am also not a luthier, not even a novice. This is what I did on my Ibanez Hummingb…"

Eugen C replied Jul 8, 2010 to Should I replace the adjustable bridge on my 1966 Gibson J-50?

25 Jul 28, 2013
Reply by Robbie Collins

"You are right, but in this case the voltage is low, I think that is 6V so is harmles…"

Eugen C replied Jul 4, 2010 to Ebony fretboard refret

21 Jul 22, 2010
Reply by Howard Klepper

"Thank you."

Eugen C replied Jul 2, 2010 to Neck angle/bridge height on a classical guitar

5 Jul 3, 2010
Reply by Tim Mace

"Thank you for your reply. My problem is - on my Hofner classic guitar, if I put a s…"

Eugen C replied Jul 2, 2010 to Neck angle/bridge height on a classical guitar

5 Jul 3, 2010
Reply by Tim Mace

"Hello Manuel. Take a look at this: http://fretsnet.ning.com/forum/topics/12-string-s…"

Eugen C replied Jun 22, 2010 to Hi everyone! Problems with acoustic repair

7 Jun 22, 2010
Reply by FRANK

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service