FRETS.NET

Mike Kolb's Discussions (1,032)

Discussions Replied To (941) Replies Latest Activity

"https://reverb.com/item/345541-new-ibanez-edge-pro-tremolo-height-adjustment-screw-b…"

Mike Kolb replied Jul 4 to LTd PIVOT POlts

2 Jul 5
Reply by joe butkins

"One thing I've discovered about fitting saddles (particularly in balancing piezo res…"

Mike Kolb replied Jun 23 to Saddle seating problem?

1 Jun 23
Reply by Mike Kolb

"Sounds like the HPL necks are driving Martin in the direction of kitchen appliances,…"

Mike Kolb replied Jun 8 to Super glued Martin neck/body joint

19 Jun 27
Reply by Brian Stewart

"Right, Volume #3  is out-of-print (along with Volume #1) but the rest are still avai…"

Mike Kolb replied May 23 to GAL Big Red Book Vol. 3

2 May 23
Reply by Bob H Abernathy III

"Just now doing a neck reset on an older Martin B1 acoustic bass, with a mortise/teno…"

Mike Kolb replied May 16 to Martin DM neck bolts?

9 May 16
Reply by Mike Kolb

"Sure, I believe that's the case.  The guitar should be built stoutly-enough that sim…"

Mike Kolb replied May 13 to Guild Starfire 12string. String tension question.

5 Jun 9
Reply by Brian T. Williams

"You might have to snug-up the trussrod a taste after installing the heavier set but,…"

Mike Kolb replied May 12 to Guild Starfire 12string. String tension question.

5 Jun 9
Reply by Brian T. Williams

"Thanks, Mark... yes, that was one option but, fortunately, the "big smile" was tamed…"

Mike Kolb replied Apr 27 to Badly distorted back problem.

7 Apr 27
Reply by Mark McLean

"Exactly...  I had it in & soaking for about 1/2-hr, now it's sitting on a shelf,…"

Mike Kolb replied Apr 24 to Badly distorted back problem.

7 Apr 27
Reply by Mark McLean

"Thanks Roger... that had briefly crossed my mind but I was afraid to "go overboard"!…"

Mike Kolb replied Apr 24 to Badly distorted back problem.

7 Apr 27
Reply by Mark McLean

RSS

© 2020   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service