FRETS.NET

Charlie Hoffman's Discussions (37)

Search Forum

View

Discussions Replied To (34) Replies Latest Activity

"Many years ago I went to the local scrap metal place and got a piece of steel I beam…"

Charlie Hoffman replied Feb 7, 2012 to Long flat surface for sanding neck blanks

 8 Feb 7, 2012
Reply by Charlie Hoffman

"My shop has a Baldor which runs at 1700 with a 12" wheel.  Conventional wisdom says…"

Charlie Hoffman replied Sep 30, 2011 to Buffers and such

 11 Oct 1, 2011
Reply by Mark A. Kane

"I can only second Frank ford's comments, but would like to add just a bit.  In the e…"

Charlie Hoffman replied Jul 23, 2011 to Thoughts on Luthiery School Vs. Apprentinceships

 11 Jul 25, 2011
Reply by Gary Fried

"Here in Minneapolis we have confronted this problem for 40 years. Every year in the…"

Charlie Hoffman replied Apr 18, 2011 to Dry Guitars - Moisture Content Meters & Case Humidifiers

 8 Apr 19, 2011
Reply by Gary Fried

"We use titebond to hold it together while we do the scoops.  Remember, the scoop is…"

Charlie Hoffman replied Mar 6, 2011 to I Need help with regluing a snapped-off headstock

 42 Nov 29, 2018
Reply by Terry Chapman

"As a follow up I have put some photos on my web site.  Look here:  http://www.hoffma…"

Charlie Hoffman replied Mar 3, 2011 to I Need help with regluing a snapped-off headstock

 42 Nov 29, 2018
Reply by Terry Chapman

"I have never come up with a good solution for this.  I know of no finish that will w…"

Charlie Hoffman replied Mar 2, 2011 to clear coating over signature

 14 Mar 9, 2011
Reply by STGuitarworks

"End grain will not make a strong glue joint, period!  We glue the peghead back in pl…"

Charlie Hoffman replied Mar 2, 2011 to I Need help with regluing a snapped-off headstock

 42 Nov 29, 2018
Reply by Terry Chapman

"I am very fond of a spokeshave from Lee Valley tools.  I think it may be under their…"

Charlie Hoffman replied Feb 16, 2011 to request for input: what spokeshave should I get?

 10 Mar 1, 2011
Reply by brian mastro

"For what its worth, Martin will pay for replacing the original bridge with an oversi…"

Charlie Hoffman replied Feb 13, 2011 to Martin bridge at wrong position

 8 Feb 13, 2011
Reply by Charlie Hoffman

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service