FRETS.NET

Russell Vance's Discussions (1,174)

Search Forum

View

Discussions Replied To (1164) Replies Latest Activity

"Hi Mr Smits, Have you checked the fingerboard radius?  After that its a case of matc…"

Russell Vance replied on Friday to Re-Fret Issue -- Ends of frets not seating

 4 on Saturday
Reply by Mike Kolb

"Plus 1, Rusty."

Russell Vance replied May 15 to Pickguard Scar

 7 yesterday
Reply by onewent

"the 335s I’ve worked on and opened up (have had tenons extending into the front pick…"

Russell Vance replied Apr 30 to 1977 Gibson ES-335TD Loose Heel Joint Repair Question

 5 May 1
Reply by Matt Dreher

"Hi Chris, go ebay and search 2 mm neoprene repair material or cut up a computer mous…"

Russell Vance replied Mar 28 to Thin Dense Foam Underneath Tremolos

 2 Mar 31
Reply by Walter W Wright

"OK, got all that,   Andrew and Lee. I just looked through a lengthy utterly bizzare…"

Russell Vance replied Mar 9 to Linseed oil? Education needed.

 17 Mar 9
Reply by Lee Gendvilas

"Gees Roger,  "Am I a vegan or a member of PETA?  Nope".   And there 8 million Americ…"

Russell Vance replied Mar 5 to Bridge pin size and angle

 23 Mar 16
Reply by Ron Frazier

"Hi Mark, ah, not what I was thinking, I gather the bores are oversized for some reas…"

Russell Vance replied Mar 4 to Bridge pin size and angle

 23 Mar 16
Reply by Ron Frazier

"Hi Paul, If the bridge was subject to shrinkage (wood shrinks laterally mainly with…"

Russell Vance replied Mar 3 to Bridge pin size and angle

 23 Mar 16
Reply by Ron Frazier

"Hi Paul,  I love refurbishing and bringing instruments back from the "dead under the…"

Russell Vance replied Mar 3 to Bridge pin size and angle

 23 Mar 16
Reply by Ron Frazier

"Hello Roger,  I use the term "dead animal" product because it serves two purposes. …"

Russell Vance replied Mar 3 to Bridge pin size and angle

 23 Mar 16
Reply by Ron Frazier

RSS

Members

© 2019   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service