FRETS.NET

steve curtis's Discussions (25)

Discussions Replied To (22) Replies Latest Activity

"hi Bill, Thanks for pointing that out - yes i do mean machinist. Over here its kind…"

steve curtis replied Sep 28, 2008 to How many repair guys have an engineering background?

10 Sep 28, 2008
Reply by Russell Vance

"Hi Ed, (first of all I'm guessing you've tried a feedback buster?) I've had the same…"

steve curtis replied Sep 17, 2008 to Acoustic sustain

7 Sep 18, 2008
Reply by Ed Fry

"amen to that, its also how to work thats vital in my opinion. knowing when tools are…"

steve curtis replied Sep 15, 2008 to How many repair guys have an engineering background?

10 Sep 28, 2008
Reply by Russell Vance

"I've never put bolts in where there weren't any before (so far), but I'm in the same…"

steve curtis replied Sep 9, 2008 to Acoustic bridge bolts... my confession.

11 Aug 14, 2009
Reply by MrGlyn

"Hey Ryan, I'm getting near the same position for myself here in the UK, but I'm keep…"

steve curtis replied Sep 9, 2008 to Any tips on starting a repair/retail shop

5 Sep 11, 2008
Reply by East Side Guitar Repair

"try taking the truss rod nut off, clean and grease it (and the part of the rod that…"

steve curtis replied Sep 6, 2008 to Martin D28 - Do I need a neck reset.

14 Sep 9, 2008
Reply by Doug Collins

"Hi Gerald, looks to me like you should get all the action adjustment you need from t…"

steve curtis replied Sep 5, 2008 to Martin D28 - Do I need a neck reset.

14 Sep 9, 2008
Reply by Doug Collins

"i've always found its best to spend as much time as is needed cleaning out the fret…"

steve curtis replied Sep 4, 2008 to Fret tang depth

7 Sep 4, 2008
Reply by steve curtis

"Hi Sunny, sounds like a minor fret issue - most likely either its low on the 12th or…"

steve curtis replied Sep 4, 2008 to Single String Position Buzz

3 Sep 5, 2008
Reply by sunny

"my main reason for not recommending customers install these large preamps is that th…"

steve curtis replied Aug 21, 2008 to Cut Hole in Side of New D-35 for Preamp: Ethics and Methods

17 Jan 5, 2013
Reply by Paul Verticchio

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service