FRETS.NET

danove's Discussions (76)

Discussions Replied To (73) Replies Latest Activity

"Grahame! - Check out this shop Its in the EU, so it should be avilable to you. Nitro…"

danove replied Mar 3, 2010 to What to use for an Acrylic / Poly finish?

21 Oct 24, 2012
Reply by Dave Yelverton

"Nice fit, Magnus"

danove replied Nov 18, 2009 to Broken headstock on cheap Fender

13 Nov 21, 2009
Reply by Evan Bradley

"It probably does not affect the tone. There maybe is an issue with UST pickups. If…"

danove replied Oct 7, 2009 to Argument with a luthier over distance of low E bridge pin hole from saddle

6 Oct 7, 2009
Reply by William F.Eden

"Dividing the fretting in a) down to the top of the fret, and b) down behind the fret…"

danove replied Aug 19, 2009 to BFTS opinions please

17 Aug 19, 2009
Reply by danove

"Landola had a serie of steel string acoustics with JLD (maybe still has?) I tried s…"

danove replied Aug 17, 2009 to 12-string set-up blues

58 Aug 30, 2009
Reply by Antonio Cotichini

"A few reflections: Compensation is done at the bridge, for the stretch down to the…"

danove replied Aug 17, 2009 to BFTS opinions please

17 Aug 19, 2009
Reply by danove

"Hard to tell without holding it, but with the risk that there is unidentified glue i…"

danove replied Jul 13, 2009 to Nasty headstock break on OME Banjo - Any advice?

4 Jul 13, 2009
Reply by Bill Langsdorf

"It is easily fixed pulling thin steel wire through tiny holes to glue up a reinforce…"

danove replied Jun 28, 2009 to Dropped Guitar

5 Jun 28, 2009
Reply by danove

"Yes - I got the bottle-in-the-window myth from a violin builder 30 years ago. Unfor…"

danove replied Jun 9, 2009 to Varnish/Laquer

9 Jun 10, 2009
Reply by John Cadd

"very interresting, Bob! I wonder if oxygen is involved in the chemical process of t…"

danove replied Jun 9, 2009 to Varnish/Laquer

9 Jun 10, 2009
Reply by John Cadd

RSS

© 2022   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service