FRETS.NET

A kid I know (the son of a good friend) had his fairly new Fender flattop wrecked at a scouts camp last summer. They have had insurance money for it and he is getting a new guitar. He showed me the wreck and said he was going to put it up on the wall as a memory, but I talked him into giving me a shot of making it playable again, and still be possible to use as wallhanger memory.
I thought it had quite a promising breakage, with plenty of wood to give a strong joint. I glued it with hot hide glue. What do You guys think of this, will it hold? From what I have read, a joint like this is as strong or even stronger than the surrounding wood if done correctly...

At his request I didn´t do any finish work exceptcleaning excessive glue.
It has now been stringed up during two days and seems OK.

Magnus

Pictures before:


During:


After:

Views: 318

Reply to This

Replies to This Discussion

That looks pretty good to me, Magnus. The head seems to have broken without too much loss of wood (excepting the face plate ) and It looks like you got a decent alignment and a tight joint when you glued it up.

Ned
Yes, I think I got it together with a good fit. You can hardly feel the crack on the backside. It´s allways a timewindow of stress to get the pieces in position and tighten it without any sliding surfaces before the glue starts to gel. For me this was good practice, on a relatively cheap instrument, otherwise considered as lost by its owner.

Magnus
fender flat tops make great firew00d.and little music.
Funny...
Nice fit, Magnus
Hi Danove!

I may show more of this at Ackefora.....

Magnus
good looking fix i put on new head caps last to improve the looks and some times a back cap ?
Paul,

I would probably do that on one of my own andmost certainly on a repair job for a paying customer, but this kid actually wanted the repair to be visible.

Magnus
I bought a Taylor 412 for cheap from CL a while ago and did very similar work...under the tutelage of Frank F. and Steve S. at Gryphon...if you are interested in it, I documented the work...here.

http://flatpick.ning.com/group/guitarbuildingandrepair/forum/topics...
I've fixed a few of these cheap Fender acoustics with similar brakes. I think they're called CD-60's? Anyway.. I've had good luck doing just what you've done. Good enough for a cheap, quick fix... and they've all held up for a couple years now.
CD60:s Yes...

Isn't there a guy on Ebay selling these in lot of 4 for repairs or parts?

Ned

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service