Show your latest thing!
If Frank says it's ok to post pretty pictures, I would love to see on-going and latest finished instruments here.
Replies to This Discussion
-
Permalink Reply by Penql on -
Really brilliant Martin! You need a strap? You could almost use it as a tie clip! Very, very cool!
-
Permalink Reply by Donald A. Fortune on -
Hey Martin- that lil thing has to be the greatest thing to come down the pike since sliced bread-- it looks like something that my son in law would think up but got to hand it to ya -- you got it first-- :) GOOD JOB---
Donald
-
Permalink Reply by Von Luhmann on -
I like that little guitar.....
-
Permalink Reply by Mac Walker on -
Hello all,
This is a 30" baritone guitar, one piece walnut body, 2 piece walnut neck, stainless frets, my third guitar I've built.
Next time around I'm going to move the bridge p/u further away from the bridge. Proportionately it is the same distance from the bridge as a standard scale Gibson, it doesn't have as much bottom end as I normally like.
-
Permalink Reply by Mike Baker on -
Looks good, Mac.
-
Permalink Reply by Martin Edwards on -
less is definitely more. I LIKE!!
-
Permalink Reply by Mike Fleck on -
Here is a set of FWI bridge pins I made with my CNC lathe. I wanted to learn CNC and thought would be a good first project as I live near the raw stock merchants.
-
Permalink Reply by Mike Baker on
-
Mike, those are beautiful!
-
Permalink Reply by Mike Fleck on
-
Thanks very much.
-
Permalink Reply by Randy King on -
wow! what model is your CNC? those are absolutely gorgeous.
-
Permalink Reply by Neil on -
Here's my latest thing...a short 24" scale banjo.. It has an integral Cocobolo tone ring and Cocobolo heal and pot cap.
-
Permalink Reply by Randy King on
-
© 2009 Created by Frank Ford on Ning. Create a Ning Network!
