FRETS.NET

Hello all!

A customer brought me this Gibson L-3 acoustic today and I have a couple questions.

First what can you tell me about the original tailpiece. Like what was it made out of? Can I find a suitable replacement? There is only pieces of the original left. I also will need to make or find a bridge for it. There are some pics attached. I'm very excited to work on this wonderful instrument, but will need some guidance from more experienced techs. Any info will be much appreciated.

Thanks

Views: 581

Attachments:

Reply to This

Replies to This Discussion

The cross-bar on the original tailpiece was tortoise colored celluloid, like the pickguard.  It has decomposed, and taken a bit of the wire support with it.  Finding an original to replace it is likely to take a fair bit of effort and cash.  I have one in the shop right now that's just about as dead as  yours, and I plan to make a new celluloid piece by laminating thick pickguard material (when I get the time, that is).   I have yet to decide what to use for a new wire support - maybe I can find some nickel silver rod from the knife making community.  That way, I wouldn't have to go to the plating shop.

As to the bridge, the original was a solid ebony nonadjustable one, although a new ebony adjustable archtop bridge is likely to be a more desirable one for many players.

Why would the cross bar have decomposed faster then the pickguard? The pickguard is somewhat brittle but still intact completely.

Nobody knows.  Different batches of celluloid behave differently - just one of those nasty little facts-o-life. . .

These articles from Stew Mac might be helpful:

http://www.stewmac.com/tsarchive/ts0111.html

http://www.stewmac.com/tsarchive/ts0120.html 

 

Joshua

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service