Greetings:  I'm trying to spline a new tuner buttons for my Keith D-tuners.  By measurement, a 5.5 metric triple square 12 point spline bit will work; however, I can only locate 5 and 6 mm.  So does anyone have an alternative spline substitute?  Does anyone have a non working Keith tuner that is not being used?  Thanks for any assistance.

Views: 111

Reply to This

Replies to This Discussion

Ultimately, might be easier just to get a replacement from Beacon unless you're making up something special.


© 2020   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service