FRETS.NET

Keith's Discussions (97)

Discussions Replied To (64) Replies Latest Activity

"Possibly try the Ernie Ball aluminium bronze? I've a customer who uses them with a t…"

Keith replied 6 hours ago to Steel strings with treble?

4 5 hours ago
Reply by Roger Häggström

"You've got better router skills than me! I'd just go at it with a levelling file!"

Keith replied yesterday to Bought a Dobro. got a surprise...

3 4 hours ago
Reply by Paul Breen

"Have you made any progress, David?"

Keith replied Sep 1 to Patch a hole in my Martin 000

8 Sep 3
Reply by David Roberts

"Only ask as it seems like a pretty simple thing to put together on your own. I mean,…"

Keith replied Aug 26 to To Those Using A Pressure Cooker As A Steam Generator

35 Sep 4
Reply by Mark A. Kane

"Seems that people like it. Are you using the StewMac heat stick?"

Keith replied Aug 22 to To Those Using A Pressure Cooker As A Steam Generator

35 Sep 4
Reply by Mark A. Kane

"You'd have to cut your own plug. I'd be tempted to use pearl dot. Or make up a new h…"

Keith replied Aug 5 to Strap Pin at Heel

7 Aug 5
Reply by Paul Verticchio

"Does the guitar have a heel cap which you could replace? Otherwise fill with a match…"

Keith replied Aug 5 to Strap Pin at Heel

7 Aug 5
Reply by Paul Verticchio

"It was actually a material supplied by the customer, who called it Teflon. I've neve…"

Keith replied Aug 5 to Teflon nuts

4 Aug 5
Reply by Paul Verticchio

"Yeah, I'm in the UK, I have a Triton router which takes both 1/2" and 1/4" bits."

Keith replied Jul 10 to StewMac tools and finishes in Europe

7 Jul 10
Reply by Bart van Weperen

"Hmm. Those sizes are common in the UK/US, but I guess not so much in Europe. However…"

Keith replied Jul 10 to StewMac tools and finishes in Europe

7 Jul 10
Reply by Bart van Weperen

RSS

© 2018   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service