FRETS.NET

I have an archtop with a floating Kent Armstrong magnetic pickup--Looks like poured epoxy with a black cover on top--looks like enameled brass, as does the now unattached bracket.  It's glued to a metal tab with an L shaped flange that attaches to the pickguard.  It has come unglued from the flange--literally.  Any clues as to what adhesive they might have used?  That I should use?  It looks like the Asian licensed pickup, not one hand made by Kent.  But who knows?  Model HJG S3 on the back.

If it's ACC this is easy.  If epoxy, it'll take a little longer.  If something else, who knows?

Thanks,

Larry

Views: 271

Reply to This

Replies to This Discussion

the ones i have are spot welded

This was spot welded but I successfully epoxied the pickup to the mounting flange.  Back in business!

Thanks.

Larry

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service