Martin OOCXAE bridge reglue
Hey guys! Just trying to get a few projects done on a sunday. I have a martin 6 String in here. The body is made of some kind of composite, it looks like there is a spruce top with a layer of composite over it. I was able to remove the bridge easily, but I'm not sure what kind of glue they used in the first place. It looks clear... The bridge is ebony... What should I use!?
Views: 149
Replies to This Discussion
-
Permalink Reply by Mike Kolb on
-
Seems to me this was talked-about a couple of months ago? Aha, here it is.....
http://fretsnet.ning.com/forum/topics/martin-dxk2-what-glue-for
-
Permalink Reply by Randy King on
-
Thanks, Mike. I guess I'll go with CA then. Too bad you didn't reply 10 minutes sooner, I left for the store and picked up some gorilla glue. I don't have anything that is think viscosity for CA, I've got some medium.. I think it'll do just as well. It didn't look like they really used much glue to begin with. I've masked off the area around the bridge to keep it neat, and I'm going to give it a go.
© 2024 Created by Frank Ford.
Powered by
