FRETS.NET

Got a Martin guitar with the old sharp intonation on the low E string.. 

So I made this shelf saddle..

Views: 186

Reply to This

Replies to This Discussion

Nice solution Claus.  Is it bone?  How did you create the shape?

cheers

Mark

Yes its bone. I route shelf part out by hand to fit the top radius of the bridge, its not easy but working on a jig to make that a lot easyer, the saddle is the same width all the way. You just have more room to set the intonation, you still need to file and shape the top of the saddle like you normaly would.. 

Hard to tell from the pic, but I'm curious if the angled offset gradually diminishes as it moves toward the higher strings?

RSS

© 2019   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service