I have a couple of questions for those of you that have used Tung Oil on struments finishes, please.
Is TO a suitable finish for a raw mahogony neck? If so, would it be best to use grain-filler prior to finishing or would the coats build up fast enough (without Gr/fill) to give a smooth finish?
If so, how many coats would be necessary to accomplish a lasting finish?
I am just weighing options and thinking ahead, for a change...Ha!
Gotcha! When asking my original question, I was equating pure tung oil as a "better version" of Tru Oil. Now through education I understand the difference. Tru Oil being a 'polymerized type' of tung oil...correct?
It is always a great thing when I have a "meeting of my mind"....;-)
I used Tru-Oil on a ebony fretboard I converted to fretless. Two coats wiped on and it dried glossy. I took it to satin with 0000 steel wool.
Also, I wiped 2-lb cut shellac onto a dyed mahogany body and finished with steel wool and it's beautiful. Not as durable as Tru-Oil but a nice finish.
Retrorod have you ever tryed puting four coats of thin C.A on a neck??? IT will give you a very fast working neck.I have done a few of them this way and the players seem to like it very much.And you get a good hard finish out of it as well .But it will not change the coulor of the wood.If you require some coulor you need to put your coulor on first but not on bare wood.Bill...........
Andrew what part do you want to know about???BILL...........
Well I just take a piece of 6mill plastic about 10" square and fold it into a 3" pad and put the thin C.A on that a little at a time and wipe it on the neck. Then let it dry for a 1/2 an hour or so then put another coat on untill you build all the coats on that you want Then you just finish sand or steelwoll it just like you would do with Laquer. Be shure that you have lots of fresh air and a very good mask as this stuff is not good for your health....Bill..........
© 2023 Created by Frank Ford. Powered by