Forum Discussions (4,404)
| Discussions | Replies | Latest Activity |
|---|---|---|
LG-1 bracingGot this curious LG-1 in the shop....No serial number...Painted back of headstock ( looks original )...My question...What's the deal with t… Started by thefishinmusician in Luthier Talk |
1 |
Apr 27, 2022 Reply by thefishinmusician |
Ovation rescue... Yes, I know...Hi folks, I've been asked to salvage a cheap Ovation Celebrity (made in Korea) for a local music store. This instrument is a repair (majo… Started by Chris Vallillo in Luthier Talk |
6 |
Apr 23, 2022 Reply by Taffy Evans |
Congratulations to Roger HagstrommMember Roger and his work is the subject of the cover story of the latest issue of American Lutherie. https://luth.org/journal/american-lu… Started by Joshua Levin-Epstein in Luthier Talk |
8 |
Apr 19, 2022 Reply by Roger Häggström |
My Vice. Bench or Island pedestal Mounted.Hi, when I responded to the post on island bench/vice some time ago and showed what I have used for many years, I had not looked at the lin… Started by Taffy Evans in Luthier Talk |
1 |
Apr 18, 2022 Reply by Roger Häggström |
Micro Mesh pads, proper careJust received a Micro Mesh set and would like to get some insight on how to properly maintain their surfaces. I see what not to use and un… Started by John Yungbluth in Luthier Talk |
2 |
Mar 28, 2022 Reply by Mike Kolb |
What to do about bridge pin and saddle staining?Starting out by saying I am not a luthier, but I could use some luthier advice. My bone bridge pins and saddle are picking up color from th… Started by Jon Jerome in Luthier Talk |
2 |
Mar 26, 2022 Reply by Mark McLean |
Bruno guitar: Comment and QuestionThis is the Bruno guitar that when I bought it had the back held on with duct tape. When I went to match the back up with the sides, there… Started by George Roberts in Luthier Talk |
6 |
Mar 24, 2022 Reply by Chris Vallillo |
Rickenbacker Binding SourceLooking for source of Rickenbacker checker binding as seen on 660-12. Thank you! Started by Thomas James in Luthier Talk |
0 | Mar 20, 2022 |
Cutting nut slots on Dobro so that top of strings are level with each other?Hi everyone, What’s the best way to cut the nut slots on a lap steel guitar so that the tops of the strings are all level with each other?… Started by Ryan Matzen in Luthier Talk |
13 |
Mar 14, 2022 Reply by Ryan Matzen |
Glue turns to dustHi, here are some photos of a recent neck reset of a Maton guitar, a 1997 model. I had planned to use my new styrene cutting tool but as it… Started by Taffy Evans in Luthier Talk |
1 |
Mar 12, 2022 Reply by Len Biglin |
© 2024 Created by Frank Ford.
Powered by
