FRETS.NET

It has a longer working time and it says it's stronger..Dis- Advantages??

Views: 3438

Reply to This

Replies to This Discussion

I would like to add....when I am using epoxies on a wood joint, I dremel little pockets on both the male and female sides of my joint...Let little pools of glue help the joint get stronger!
Titebond 3 front label says it is stronger but the back label in the instructions caution about using the glue where there will be any stress. So, they get their advertising in to get you to buy it and also caution you against using it anywhere it might matter.

None of the Titebonds (1, 2, or 3) are totally water proof. Do a test and put some dried glue in some water and see what happens. It swells the glue and makes a gummy gooey mess.
You are correct......none of them are totally waterproof. Then again, neither is hide glue. Regardless, I don't take my instruments out in a downpour, let them swim around in the sink, or float around in the bottom of a wet boat. So, my favorites still are Titebond original, Elmers Carpenters glue, or hide glue. YYMV, Dave Fox
I like Titebond III only for making herringbone purflings which have to be bent - and only if the colors of the used woods are sufficiently compatible with the (muddy) color of Titebond III.

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service