Ca over hide glue ?

Hi guys, I was just gluing a tight crack in the front of the saddle slot in an old Martin. I used hot hide glue but I'm not real sure much of the glue actually wicked down into the crack. I did heat the bridge before and moved the front of the bridge a little to work the glue in. My question is...Would wicking thin CA around the area be all right after using the HHG ? I just hope the hide glue did the trick !

.

▶ Reply to This

Replies to This Discussion

Permalink Reply by Pierre-Antoine Roiron on December 21, 2009 at 12:33am

There's a link named "upload files" under the text window of your reply.

▶ Reply

Permalink Reply by FRANK on December 20, 2009 at 3:22am

iI think you need to clean your crack before using ca glue glue wont stick to old glue

▶ Reply

Permalink Reply by William F.Eden on December 20, 2009 at 10:24am

Dave If you want to send a pic. at any time now after you have allready started the thread. You will see at the bottom of the [ Reply To This site] '' Upload Files'' click on it and you can brows throught your pictures open and pick the pic. you want to send. I hope this is of some help to you. Good luck on your next prodject .Bill.""""""""""