Forum Discussions (4,424)
| Discussions | Replies | Latest Activity |
|---|---|---|
HAIRLINE LACQUER CRACKS,ON BACK OF AMERICAN STRAT NECK.DOES ANYONE HAVE SUGGESTIONS,HOW I CAN REMOVE,LACQUER CRACKS,LEFT-BY SLOPPY WORK DONE BY A GUITAR TECH,WHILE,DE-RADIUSING,THE FINGERBOARD.… Started by STAN BEDDOW in Luthier Talk |
2 |
Dec 6, 2010 Reply by Pierre-Antoine Roiron |
Pickguard StaticI've just completed a telecaster, and wired in a pair of brand new Lace Sensors. Bridge is standard, with standard ground wire run to the v… Started by Randall Curtis Bowman in Luthier Talk |
6 |
Dec 5, 2010 Reply by Brady Anderson |
I'm looking for a place where I can find cheap scraps of wood??I'm looking for a supplier who sells small scraps of spruce, mahogany, ect. to use for testing colors and odd repairs. I'm tired of spendin… Started by Jeff Perkins in Luthier Talk |
22 |
Dec 4, 2010 Reply by Ned Knepp |
Removing Aliphatic GlueOnce in a while a straightforward repair job starts to grow in complexity upon deeper inspection. An older Martin came in, the owner reque… Started by Robert Sherman in Luthier Talk |
6 |
Dec 3, 2010 Reply by FRANK |
Bass customization: Custom "pick guard" & P-Bass wiringMy buddy Mike wanted P-Bass pick-ups installed into his De Armond Jet-Star Spel. The wiring was surprisingly simple. Or I guess it is com… Started by Trent Norgart in Luthier Talk |
0 | Dec 3, 2010 |
What to use to fill cracks in a newer Martin 00016-GTE?I've repaired a side crack in a Martin 00016-GTE, structurally. What would you guys use to fill in the crack? I've already sealed it with s… Started by Jeff Perkins in Luthier Talk |
35 |
Dec 3, 2010 Reply by Mark Wallace |
Repairing grain tears after bridge removalI am doing some work on a 1975 Gibson Hummingbird that has had some rather poor repairs in the distant past. The current owner has had the… Started by Greg Maxwell in Luthier Talk |
8 |
Dec 1, 2010 Reply by Greg Maxwell |
Bison Tix gel on nitro finishHi all, Last year I bought a new Gibson Hummingbird. In its period in the shop the pickguard had come half loose, a common issue with Gib… Started by gijs in Luthier Talk |
4 |
Dec 1, 2010 Reply by Ned Knepp |
Scalloped Fingerboard, Tricks?I recently acquired an early 19th century French (1820-30?) guitar with a scalloped fingerboard. I'm planning on making a reproduction of i… Started by Scot Tremblay in Luthier Talk |
2 |
Nov 30, 2010 Reply by Scot Tremblay |
1906 Gibson A4? in pieces - Frank info would be most welcome.I recently bought a 1906 Gibson 5655 in London England which had been dropped. Frank according to the archive I think you might have seen t… Started by Mike Keen in Luthier Talk |
2 |
Nov 29, 2010 Reply by Mike Keen |
© 2026 Created by Frank Ford.
Powered by
