Forum Discussions (4,420)
| Discussions | Replies | Latest Activity |
|---|---|---|
need to learn about spraying polyi'm getting on fine with cellulose folks but I think I need to get friendly with poly finishes. where do I start ?. i'm not even familiar w… Started by Nick - p in Luthier Talk |
1 |
Dec 29, 2017 Reply by Brian Evans |
Padding MaterialHi Guys & Gals, Anybody willing to share their thoughts with me about what material is best for protecting wood and finishes when held… Started by Jon Cooper in Luthier Talk |
13 |
Dec 25, 2017 Reply by Allan Bacon |
Latest Dremel info?Hello All, In coming up with a new rosette design I find that I need a .030" wide circular groove right around the center. So I ordered a c… Started by Brian Burns in Luthier Talk |
12 |
Dec 25, 2017 Reply by Allan Bacon |
Strength of hide glueI sent a request to a producer (Dr.Oetker) of gelatin about the strentgh of their product. This was the answer: Bloom (6,67% 10°C AOAC) 220… Started by Bob Steinarsson in Luthier Talk |
6 |
Dec 25, 2017 Reply by Bob Steinarsson |
Kramer aluminum necks: how is the fretboard bonded?Hi, everyone. A customer has contacted me about replacing the ebanol fretboard on his 1981 Kramer XL bass with an aluminum neck. Before… Started by Eric Gleason in Luthier Talk |
1 |
Dec 24, 2017 Reply by Joshua Levin-Epstein |
Crack in poly finish - Can it be repaired?Hi guys, Any ideas how to make this go away :-) The crack is only in the finish, but I am quite sure it goes all the way down to the wood.… Started by Palle Clausen in Luthier Talk |
2 |
Dec 22, 2017 Reply by Mike Kolb |
Fender Jazz Bass neck shaping .Hi everyone , Ive been asked to shave the back of the neck on a US Jazz bass , its the type with carbon fibre stiffening , and the owner fi… Started by Len Biglin in Luthier Talk |
8 |
Dec 21, 2017 Reply by Walter W Wright |
CA glue darkens wood..So, I tried my first attempt at drop filling a chip in a spruce top with CA glue. Not so good... The CA darkens the wood so that it is very… Started by Palle Clausen in Luthier Talk |
6 |
Dec 19, 2017 Reply by Palle Clausen |
Next step in finishing this A Model GibsonHello I acquired this A model that someone has stripped the finish off of. Can i get some suggestions where to go from here as far as fini… Started by Tim in Luthier Talk |
24 |
Dec 14, 2017 Reply by Ed Minch |
More loose bindingI have a 17 year old F5 mandolin with spirit varnish finish. The celluloid binding on the long curve on the bass side of the headstock is… Started by LARRY KLOSE in Luthier Talk |
3 |
Dec 10, 2017 Reply by Greg Mirken |
© 2026 Created by Frank Ford.
Powered by
