Forum Discussions (4,418)
| Discussions | Replies | Latest Activity |
|---|---|---|
separating glue-joints with hot airgunI wanted to share my experience of what I see as a quite easy (and so far successeful) method of opening glue joints. It has been tested in… Started by Magnus Hultin in Luthier Talk |
22 |
Jan 26, 2013 Reply by Ned Knepp |
Exact measurements of Gibson 24-3/4" scaleCan someone tell me what the exact measurements are between the face of the nut and front edge of the saddle for both E strings on a Gibson… Started by Michael Van Brackle in Luthier Talk |
18 |
Jan 26, 2013 Reply by nathan clark |
Tightening an unreachable jackHi guys. This is an Aria baritone classical guitar. It has a loose jack and it sticks out badly. The trouble is that I cannot reach the da… Started by tadej bratkovic in Luthier Talk |
8 |
Jan 24, 2013 Reply by tadej bratkovic |
Refretting of arch top with floating neck extensionI am going to refret a Hofner 455S archtop with a fairly thin laminated top. This guitar has a neck extension that is without body connect… Started by Bob Steinarsson in Luthier Talk |
11 |
Jan 24, 2013 Reply by Eric Steven Johansen |
Fret tangs sticking out the side of a Fender TeleHi Guys, I have a mid-2000's MIM Fender Tele that has the fret tangs sticking out the side all the way up the neck on both sides. It has… Started by Cyrus Comiskey in Luthier Talk |
9 |
Jan 23, 2013 Reply by Mark Pollock |
Wiring suggestion for Epiphone Dot and a LP Studio 1991Hi to everybody! I have to upgrade a Epiphone Dot. The costumer wants a classical blues sound. I've attached the wiring diagram of the Epi… Started by Stefano in Luthier Talk |
12 |
Jan 22, 2013 Reply by Michael P. Lemieux |
What do you charge for a hole repair?Hi folks, I've seen several websites of repairmen who have a list of basic prices for standard repairs like re-frets, new nuts, neck resets… Started by John Cartwright in Luthier Talk |
10 |
Jan 20, 2013 Reply by John Cartwright |
Elite strat to get a Kahler.Hi everyone , my friend has a Fender Elite strat , and wants to replace the original bridge with a Kahler , has anyone tried this before ?… Started by Len Biglin in Luthier Talk |
2 |
Jan 20, 2013 Reply by Len Biglin |
Spontaneous steel wool combustionI smelled smoke in my shop tonight the source was a glowing red roll of Lee Valley 0000 steel wool. I put it in a bucket and filled it with… Started by John in Luthier Talk |
11 |
Jan 20, 2013 Reply by Mike Kolb |
Lets talk benches and shops!One of my favorite things to see and hear about are luthiers shops and work benches. I feel like they are key elements that m… Started by Luke Single in Luthier Talk |
25 |
Jan 19, 2013 Reply by RETROROD |
© 2025 Created by Frank Ford.
Powered by
