Forum Discussions (4,420)
| Discussions | Replies | Latest Activity |
|---|---|---|
Old Brown Gluehttp://www.leevalley.com/en/wood/page.aspx?p=69158&cat=51&ap=2 Has anyone tried this glue or see any potential problems with it re… Started by Tim Frank in Luthier Talk |
5 |
Apr 15, 2012 Reply by Doug Berch |
Stella guitar restorationI have here some pre-war Stella guitars to restore: These guitars must have been taken to Germany to be used as a weapon for killi… Started by Tai Fu in Luthier Talk |
4 |
Apr 14, 2012 Reply by Ned Knepp |
Repair of Gibson Mandocello topI thought Frank's article on the repair of the top sink on a Gibson K-2 mandocello was certainly up there with his usual level of excellenc… Started by Bernie Daniel in Luthier Talk |
20 |
Apr 12, 2012 Reply by Kerry Krishna |
Removing a pickguard from a 1968 Gibson SJ DeluxeI have a 1968 Gibson SJ Deluxe guitar that has a broken pick guard that the fellow who brought it to me would like replaced. I have been ab… Started by Philip Secrist in Luthier Talk |
5 |
Apr 10, 2012 Reply by mike carne |
David Russel Young - The Steel String Guitar: Construction and RepairI don't have this in my collection, but have seen many references. It's available used on Amazon for roughly $100! Reviews anyone? Started by Thomas James in Luthier Talk |
8 |
Apr 8, 2012 Reply by Jay Gordon |
Stew-Mac's PowerKnifeHi, has anyone used a PowerKnife, and if so, do you like it? Thanks.:) Started by Frank Medina in Luthier Talk |
2 |
Apr 8, 2012 Reply by Frank Medina |
RIP JIM MARSHELLI just thought i would add a little something on here about the recent passing of the great jim marshell the founder and inventor of the ma… Started by Ian Supplee in Luthier Talk |
5 |
Apr 7, 2012 Reply by Mark A. Kane |
drilling for an endpin, in an OvationI would like to install a p/u, and 1/2" endpin, in my circa 1979 Ovation Ballader. Can I simply remove the strap pin, and carefully drill… Started by Dave Richard in Luthier Talk |
2 |
Apr 7, 2012 Reply by Dave Richard |
When to file when to replace frets?I have a Guild guitar that has the typical fret grooves, not bad but are creating buzz. Is there a rule of thumb as to replacement vs filin… Started by Jerry Ryan in Luthier Talk |
8 |
Apr 6, 2012 Reply by lonnie james barber |
Broken headstocks and cheap hardshell casesI know why it happens but it seems like 80% of the headstock repairs I get are from this scenario. Is it just me or is this combination a f… Started by John in Luthier Talk |
6 |
Apr 4, 2012 Reply by Pierre-Antoine Roiron |
© 2025 Created by Frank Ford.
Powered by
