Forum Discussions (4,403)
| Discussions | Replies | Latest Activity |
|---|---|---|
Do Gibson Glue their Frets?Hi, I was wondering whether anybody could clarify something for me. Does anybody know if Gibson use glue whilst fretting these days. I only… Started by Darren in Luthier Talk |
4 |
May 13, 2009 Reply by Len Biglin |
Kay with adjuster in neck heel.Hi guys I tried this a week ago and didn't get a bight. It's a Kay Barney Kessel and in the heel cap it has a deep hole with a threaded rod… Started by Len Biglin in Luthier Talk |
2 |
May 13, 2009 Reply by Len Biglin |
Bracing patternHi, I’m just starting to build a Matrin “0" I guess it’s a Parlor guitar. I need a photo or drawing of the bracing pattern. There seems to… Started by Robert Freemond in Luthier Talk |
6 |
May 11, 2009 Reply by Robert Freemond |
Best Pick For Solid State AmpAccording to the good friends over on letstalkguild.com for my D-35 Guild with a LRBaggs in the slot pick-up wire I should be leaning towar… Started by Rob in Luthier Talk |
8 |
May 10, 2009 Reply by Rob Mercure |
Help requested for a poly finish!I have a Guild GAD 50 with a poly finish. After repairing breaks and cracks, it needs the entire top refinished to achieve a decent finish.… Started by Jerry Ryan in Luthier Talk |
4 |
May 9, 2009 Reply by Jerry Ryan |
Graph tech saddles in conductive plastic?Hi again, has anyone heard of conductive graphtech , I saw a brief rave on a website but it sounded a bit uninformed. Thanks Len Started by Len Biglin in Luthier Talk |
3 |
May 9, 2009 Reply by Rob Mercure |
Truss Rod Effect on "Action"I've known there's a common but mistaken belief that the truss rod exists to raise or lower the "action" at the 12th fret rather than just… Started by Brent Hutto in Luthier Talk |
2 |
May 9, 2009 Reply by Brent Hutto |
the impossible neck resetin Franks articlel on doing a neck reset with a "bolt on", http://www.frets.com/FRETSPages/Luthier/Technique/Guitar/NeckReset/BCRIchReset/b… Started by fred huang in Luthier Talk |
5 |
May 9, 2009 Reply by Frank Ford |
How to release cam clamp?Ok, this is clearly a newbie mistake. I have a cam clamp that I let slide all the way closed on itself. Now the jaws are shut and I can't g… Started by Dan Coplan in Luthier Talk |
3 |
May 8, 2009 Reply by Dan Coplan |
Looking for info. Dose any one know any thing about a R.S Williams and sons Co.Ltd Guitars?????I took this old Paurlor in on trade to-day it is in veary good shape except for the finish. But then you all know how I like to make every… Started by William F.Eden in Luthier Talk |
3 |
May 8, 2009 Reply by Bob Webster |
© 2024 Created by Frank Ford.
Powered by
