Forum Discussions (4,417)
| Discussions | Replies | Latest Activity |
|---|---|---|
New here with a few questionsHi everyone. I am sorry if I have the wrong place for my type of questions, but I am looking for information on what I believe is an old g… Started by Jo-Ann Pentelichuk in Luthier Talk |
23 |
Mar 30, 2012 Reply by John |
Neck Block Grain Direction- Steel String GuitarI am about to install the neck block on a new guitar build and have a question about which way to orient the end grain of the block. Most… Started by Charlie Dunford in Luthier Talk |
5 |
Mar 30, 2012 Reply by Charlie Dunford |
Harmony MontereyI have a few questions regarding a restoration of a Harmony Monterey and it seems that I read a post by someone on the forum that specializ… Started by Dale Humphries in Luthier Talk |
12 |
Mar 29, 2012 Reply by Dale Humphries |
R.I.P. Earl Scruggs!!What else is there to say. Off to the Foggy Mountain!! Started by Stephen Morgan in Luthier Talk |
3 |
Mar 28, 2012 Reply by Lee Gendvilas |
Japanese Bigsbyish trem needed a whammy barCustomer wanted to know if I could do something about a Whammy bar arm for him,....I told him I'd think about it. A day later I found an of… Started by John in Luthier Talk |
4 |
Mar 28, 2012 Reply by Alexander López |
Gibson L00 bridge repairHi I just got an old 1930's Gibson L00 with the bridge peeling off. I suspect heat because I notice strings of material under the bridge w… Started by Tai Fu in Luthier Talk |
6 |
Mar 27, 2012 Reply by LARRY KLOSE |
Taylor Big Baby guitar, bolted-on neck, should I be concerned?Hi, I have been thinking about maybe getting a Taylor Big Baby acoustic guitar, but I have read that the neck is actually bolted on, with 2… Started by Arthur Sweeney in Luthier Talk |
7 |
Mar 24, 2012 Reply by Mark McLean |
pain when playing guitar, what to do..?Hi all, again, this is another post that is not really a luthier question, but I always get such good advice here, so I thought I'd ask...… Started by Arthur Sweeney in Luthier Talk |
16 |
Mar 23, 2012 Reply by Richard Bales |
Goldilocks acoustic, not too bright, not too deepHi all. What would you recommend for a quality acoustic guitar under $1,000, that is not deep and bassy like a Martin, nor bright and trebl… Started by Arthur Sweeney in Luthier Talk |
14 |
Mar 23, 2012 Reply by Mark A. Kane |
Guitar PlansI just finished reading the article on Lloyd Baggs in Fretboard Journal #24. Does anyone know if there are plans available from any of the… Started by Allen L Wall in Luthier Talk |
0 | Mar 20, 2012 |
© 2025 Created by Frank Ford.
Powered by
