Forum Discussions (4,417)
| Discussions | Replies | Latest Activity |
|---|---|---|
David Russel Young - The Steel String Guitar: Construction and RepairI don't have this in my collection, but have seen many references. It's available used on Amazon for roughly $100! Reviews anyone? Started by Thomas James in Luthier Talk |
8 |
Apr 8, 2012 Reply by Jay Gordon |
Stew-Mac's PowerKnifeHi, has anyone used a PowerKnife, and if so, do you like it? Thanks.:) Started by Frank Medina in Luthier Talk |
2 |
Apr 8, 2012 Reply by Frank Medina |
RIP JIM MARSHELLI just thought i would add a little something on here about the recent passing of the great jim marshell the founder and inventor of the ma… Started by Ian Supplee in Luthier Talk |
5 |
Apr 7, 2012 Reply by Mark A. Kane |
drilling for an endpin, in an OvationI would like to install a p/u, and 1/2" endpin, in my circa 1979 Ovation Ballader. Can I simply remove the strap pin, and carefully drill… Started by Dave Richard in Luthier Talk |
2 |
Apr 7, 2012 Reply by Dave Richard |
When to file when to replace frets?I have a Guild guitar that has the typical fret grooves, not bad but are creating buzz. Is there a rule of thumb as to replacement vs filin… Started by Jerry Ryan in Luthier Talk |
8 |
Apr 6, 2012 Reply by lonnie james barber |
Broken headstocks and cheap hardshell casesI know why it happens but it seems like 80% of the headstock repairs I get are from this scenario. Is it just me or is this combination a f… Started by John in Luthier Talk |
6 |
Apr 4, 2012 Reply by Pierre-Antoine Roiron |
Buzz Feiten anyonecan I get more info on Buzz Feiten tuning systems anyone Started by FRANK in Luthier Talk |
8 |
Apr 3, 2012 Reply by FRANK |
64 lg1 bridge plateMy plate is grooved EtoE but not beyond at either end.I talked to a luthier that is going to replacie the plastic bridge and he said 3bil… Started by Rodger C.Palmer in Luthier Talk |
9 |
Apr 3, 2012 Reply by Rodger C.Palmer |
can i steam over "tightbond" section ?an odd one to tackle.. i have a solid alder body to which i have tightbonded a 1.5mm thick walnut veneer. the elbow contour shape [ jazz ba… Started by nick-p in Luthier Talk |
7 |
Apr 3, 2012 Reply by Pierre-Antoine Roiron |
Epiphone EJ-300CE needs peghead repair - advice, please!I've been putting this off for way too long, and I've finally decided to reattach the peghead to my wife's second favorite guitar. (Unfort… Started by Tom Mitchell in Luthier Talk |
19 |
Apr 2, 2012 Reply by Christian Johnson |
© 2025 Created by Frank Ford.
Powered by
