Forum Discussions (4,418)
| Discussions | Replies | Latest Activity |
|---|---|---|
How would I remove Jasco stains?Installing a new redwood top on a ABG. After gluing the top on, I stripped the body of the guitar in preparation for refin. Now there are… Started by Mike Kolb in Luthier Talk |
8 |
Jan 28, 2011 Reply by FRANK |
Anyone in the Portland, OR area need nitro lacquer?I'm ordering some nitro lacquer from Seagraves Coatings (the company that is now making the Lawrence McFadden's lacquer we've been using fo… Started by Todd Mylet in Luthier Talk |
0 | Jan 26, 2011 |
Add extension nut ,play short time,took it off,how to come back original guitar action?Hi There, I wish can play lap slide on my acoustic flat top,so,i bought extension nut,simply installed a nut extension on my guitar,an… Started by Rmin in Luthier Talk |
1 |
Jan 25, 2011 Reply by FRANK |
Bullet truss rod nut busted off flush, how I got new threadsSo.......Somebody snapped the bullet truss rod nut off....Snapped the rod clean off at the washer...Maple bound neck, so surgery under the… Started by thefishinmusician in Luthier Talk |
7 |
Jan 25, 2011 Reply by Paul Verticchio |
Which buffer?A good stand buffer has been on my watch list for the past few weeks, and I'm still wondering some pro-specs. Grizzly doesn't sell any buff… Started by Jeremy Borkat in Luthier Talk |
6 |
Jan 24, 2011 Reply by Doug T |
What type of bracket and where to buy?I purchased two of these for $.50 at a yard sale. The box said "Mounting L Brackets" and nothing else. That seems somewhat obvious, and f… Started by Doug T in Luthier Talk |
7 |
Jan 23, 2011 Reply by Doug T |
Martin 00-21 cracksI have a beautiful 1969 00-21 which I bought new and love. I'll never sell it. But it has always had top issues: it's been back to Martin t… Started by Mike Frantz in Luthier Talk |
8 |
Jan 22, 2011 Reply by Ned Knepp |
Gibson SG crack repair helpHello, I have a customer who brought in a Gibson reissue SG. The bottom half at the control cavity had been broken off and then re glued. H… Started by Trent Cudd in Luthier Talk |
2 |
Jan 20, 2011 Reply by Trent Cudd |
Need to humidify an all-HPL guitar?Hello. I have a Martin DXM acoustic guitar. The whole guitar body is made of HPL (high-pressure laminate). My question is, do I still have… Started by Arthur Sweeney in Luthier Talk |
6 |
Jan 19, 2011 Reply by Enis Moran |
1927? Martin "O" with long side crackSN#32665 Just wanted to get some repair feedback on this guitar my Aunt found in her closet. I have been repairing instruments for about 4… Started by Nick Miller in Luthier Talk |
5 |
Jan 19, 2011 Reply by David Houchens |
© 2025 Created by Frank Ford.
Powered by
