FRETS.NET

Forum Discussions (4,418)

Discussions Replies Latest Activity

Why is it done this way?

I'm building my first mandolin from raw wood (w/Siminoff book), after thinking about it for twenty five years and disassembling/reassemblin…

Started by Billy Romp in Luthier Talk

5 May 3, 2010
Reply by FRANK

side thickness sanding

i am having some problem with highly figured woods at the waist bend using a fox bender - it cracks or splits where grain pattern changes c…

Started by Happy Builder in Luthier Talk

8 May 3, 2010
Reply by FRANK

Neck Reglue approach

I have a dilemma. I'm not sure how I want to approach this repair. The patient is a vintage Vega archtop that had a run in with my client's…

Started by East Side Guitar Repair in Luthier Talk

6 May 1, 2010
Reply by FRANK

Gibson A4 mandolin

Dear Sir I recently bought the above mandolin serial no 36418 and the archive took me here.Can you tell me anything about it ? Thanks Barry

Started by Barry Jones in Luthier Talk

1 May 1, 2010
Reply by Frank Ford

Router Bit Search

In His fine book on Classical Guitar Building, Mr. Bagdanovich references the use of a flush-cut, top-bearing, router bit, for routing out…

Started by Cameron Petersen in Metalworking, Machining, Tool & Fixture Making for Luthiers

18 May 1, 2010
Reply by Pete Cyr

bent side first to glued to the top or first cut to exact depth

two sides of rosewood have been bent they are 5 and half inches in width should i be cutting the sides to 4 inches and shaping it for the a…

Started by Happy Builder in Luthier Talk

1 Apr 30, 2010
Reply by FRANK

crack half way depthwise

one of my sides while bending at the waist curve has cracked and split half way say 1.5 mm from the outside what will be showing there is a…

Started by Happy Builder in Luthier Talk

1 Apr 30, 2010
Reply by FRANK

Removing a bridge - alternative methods?

Hello there, a mod from another forum pointed me to this site. I'm in the middle of rebuilding a ~90 year old parlor-guitar, and i hit a p…

Started by Mel O'Dantrix in Luthier Talk

7 Apr 28, 2010
Reply by David Houchens

5/16" thick slate?

Howdy.  I have access to a free +- 4x4 sized piece of slate (good one side). Would there be a good reason for me to take it home? What woul…

Started by Rick Gentry in Luthier Talk

6 Apr 27, 2010
Reply by Tim Mace

Unidentified pickup.

Gibson L series 035.jpgGibson L series 032.jpgGibson L series 012.jpgGibson L series 013.jpgGibson L series 031.jpg   What kind of pickup i…

Started by R.J. Fulton in Luthier Talk

14 Apr 26, 2010
Reply by R.J. Fulton

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service