Forum Discussions (4,418)
| Discussions | Replies | Latest Activity |
|---|---|---|
easiest wood to bendwhich is the easiest tonewood to bend will it make any difference if the side wood is same as back or diferent than the bak wood Started by Happy Builder in Luthier Talk |
0 | Mar 29, 2010 |
bracing widthi am making a guitar as per a plan according to the plan where i need 16 mm bracing i have only 15 mm where it says 10 mm i have 8 mm will… Started by Happy Builder in Luthier Talk |
0 | Mar 29, 2010 |
RG560 Ebanez Elc. Guitar StickerHi my friends I am in trouble I just refinished the neck of a RG560 Ebanez for a coustomer and a piece of the masking has taken some of the… Started by William F.Eden in Luthier Talk |
5 |
Mar 28, 2010 Reply by William F.Eden |
kerf continous or fully cuti would like to use cut kerfs i mean seperate pieces of tringular woods not connected to each other at all will it make any difference and… Started by Happy Builder in Luthier Talk |
10 |
Mar 28, 2010 Reply by Happy Builder |
Cello bass bar repair.Howdy. Let's say that a fella found a cello with a missing bass bar. Let's say also that said bass bar was actually cut in two pieces, may… Started by Rick Gentry in Luthier Talk |
12 |
Mar 27, 2010 Reply by Frank Ford |
Top repair after bridge removalI am restoring an old Harmony mahogany body flat top. The bridge had already been removed and some top wood apparently came off with the b… Started by Robert Bander in Luthier Talk |
12 |
Mar 26, 2010 Reply by Mark Dobbins |
Do players need help with music?When you talk to players do you find they need help with music or different keys at all? Or are they all fully trained in every key.Is ther… Started by John Cadd in Luthier Talk |
46 |
Mar 26, 2010 Reply by Robert Bander |
Soft lacquer?I recently finished a couple of guitars with some old mcfadden's lacquer that was given to me. As I understood it, old lacquer is fine to… Started by Ry Charters in Luthier Talk |
6 |
Mar 25, 2010 Reply by Ned Knepp |
Martin Pickguard CrackI've recently acquired a near show room clean, including hang tags, D-18 vintage 1973. However, it had the requisite pickguard crack. Usi… Started by onewent in Luthier Talk |
12 |
Mar 25, 2010 Reply by onewent |
1937 D-28 Repair BlogA couple of weeks ago, I started a new repair article for FRETS.COM - It's a sort of "blog" style account of a project - neck resetting, ne… Started by Frank Ford in Luthier Talk |
7 |
Mar 24, 2010 Reply by Tom Krebs |
© 2025 Created by Frank Ford.
Powered by
