Forum Discussions (4,419)
| Discussions | Replies | Latest Activity |
|---|---|---|
String spacing at nut opinionsHope all are doing well. I recently was working on an acoustic guitar where the desire was to put a Gold Tone zero glide/fret nut in. The… Started by Greg Miller in Luthier Talk |
1 |
Jul 15, 2019 Reply by Mike Kolb |
Noobish Question... Truss rod tension before FB level?I was just wondering how much tension should I put on the truss rod before leveling the fretboard? I'm thinking between 1/4 and 1/2 a turn.… Started by Gert van der Does in Luthier Talk |
13 |
Jul 15, 2019 Reply by Gert van der Does |
Help Identifying an old Parlor Guitar, Larson-esque?Hello everyone! Thanks for having me. This is my first post here; I had been given a good recommendation that you fine folks might be able… Started by Aaron Jennings in Luthier Talk |
8 |
Jul 14, 2019 Reply by Christopher Haux |
tacoma acoustic bass guitarHello all,I have a Tacoma bass guitar in my shop. I took it on as a project because of how it was presented to me. When I brought it home a… Started by Lee Gendvilas in Luthier Talk |
14 |
Jul 13, 2019 Reply by Lee Gendvilas |
A Vietnamese guitar factoryStarted by Doug Berch in Luthier Talk |
4 |
Jul 8, 2019 Reply by LARRY KLOSE |
Your volute can't save you!Started by Keith Somerville in Luthier Talk |
7 |
Jul 6, 2019 Reply by Keith Somerville |
Furch guitar with exploding fingerboardHi, chaps. This came into the shop recently. It has previously been 'repaired' by someone who has used some kind of putty or something to t… Started by Keith Somerville in Luthier Talk |
2 |
Jul 5, 2019 Reply by Roger Häggström |
Suction Cups on Porous Lacquer FinishI want to use a guitar support that attaches with a suction cup on the lower bout along with a strap that hooks over the endpin. The proble… Started by Brent Hutto in Luthier Talk |
4 |
Jul 4, 2019 Reply by Stanley Alexandrowicz |
Microtonal frets?An Egyptian guitarist has been in touch about adding microtonal frets to his instrument. I've seen examples and it doesn't look like it'd b… Started by Keith Somerville in Luthier Talk |
0 | Jun 28, 2019 |
Stromberg Voisinet Venetian Headstock RepairThe head stock has a couple of issues to be addressed. I plan on using filtered compressed air to clear any loose contaminants from the pic… Started by Redacted in Luthier Talk |
0 | Jun 25, 2019 |
© 2025 Created by Frank Ford.
Powered by
