FRETS.NET

Michael Tulloch's Discussions (62)

Search Forum

View

Discussions Replied To (49) Replies Latest Activity

"Sorry Robbie..it's impossible to photograph. Largely invisible....but unstable. Furt…"

Michael Tulloch replied May 20, 2014 to A new problem : Back crack during finish.?

 11 May 21, 2014
Reply by Michael Tulloch

"Thank you Andrew, ...the moral support is an important component of my recovery, and…"

Michael Tulloch replied Feb 15, 2014 to At a loss here.

 5 Feb 15, 2014
Reply by Michael Tulloch

"Thank you Mike and Ned. Looks like a bent backer/ inside patch is in order.....and a…"

Michael Tulloch replied Feb 14, 2014 to At a loss here.

 5 Feb 15, 2014
Reply by Michael Tulloch

"This is a new neck sent to me as a roughed in blank...( headstock veneered, Heel sha…"

Michael Tulloch replied Nov 20, 2013 to Putting a little back bow in a Carbon Fibre reinforced neck.

 8 Nov 20, 2013
Reply by Michael Tulloch

"Yes Hesh.....this helps. Thank you ! I use truss rods in my builds....but in this in…"

Michael Tulloch replied Nov 18, 2013 to Putting a little back bow in a Carbon Fibre reinforced neck.

 8 Nov 20, 2013
Reply by Michael Tulloch

"I can see how much, but it's the how, I'm askin. Only way I can see would be to intr…"

Michael Tulloch replied Nov 18, 2013 to Putting a little back bow in a Carbon Fibre reinforced neck.

 8 Nov 20, 2013
Reply by Michael Tulloch

"...or Robbie, something they don't understand. You'd be surprised."

Michael Tulloch replied Aug 11, 2013 to 1965 Epiphone FT-79 Texan Scale Length

 21 Aug 13, 2013
Reply by Robbie Collins

"Here's my thing.....I use the Stewmac Saddlematic, and I double check with the math,…"

Michael Tulloch replied Aug 11, 2013 to 1965 Epiphone FT-79 Texan Scale Length

 21 Aug 13, 2013
Reply by Robbie Collins

"Thanks Ned....this is a one way truss rod, influencing the neck into back bow only,…"

Michael Tulloch replied Aug 11, 2013 to Gibson Electric Neck problem.

 4 Aug 11, 2013
Reply by Michael Tulloch

"Don't want to do the heat thing. Back bow is very slight....pulling frets and re-fre…"

Michael Tulloch replied Aug 10, 2013 to Gibson Electric Neck problem.

 4 Aug 11, 2013
Reply by Michael Tulloch

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service