FRETS.NET

Jim Bancroft

Jim Bancroft's Discussions (200)

Discussions Replied To (198) Replies Latest Activity
jeff henry

"Ned, On the this mandolin I'm sure the back is not also the heel cap. The neck sho..."

Jim Bancroft replied Oct 10 to Gibson A2 neck reset

15 Oct 14
Reply by Ned Knepp
jeff henry

"I have never reset one either, but, It's simliar to a guitar. Not sure if the end ..."

Jim Bancroft replied Oct 10 to Gibson A2 neck reset

15 Oct 14
Reply by Ned Knepp
peter

"I've tried the the graphite reinforcement in the square tube, and it helped a lot...."

Jim Bancroft replied Apr 15 to '68 Martin D-18, install adjustable truss rod or not? Opinions..?

8 May 21
Reply by peter
Tom Franceschi

"I've added glue to slightly lifting bridges on an occasional old Martin, glued wit..."

Jim Bancroft replied Apr 6 to Bridge Repair

10 Apr 11
Reply by David Houchens
Donald A. Fortune

"Maybe your pipe is too hot. I use a 1 1/2" galvanized pipe for what bending I do, ..."

Jim Bancroft replied Apr 2 to Bending wood

24 Aug 31
Reply by Bob Webster
thefishinmusician

"The mortise and tenon joint is also glued. You need to apply steam to the joint in..."

Jim Bancroft replied Apr 2 to Removing bolt on Martin neck.........

7 Apr 27
Reply by thefishinmusician
Donald A. Fortune

"I doubt you can learn this from a book. On the job experience is the best teacher...."

Jim Bancroft replied Apr 1 to Bending wood

24 Aug 31
Reply by Bob Webster
thefishinmusician

"There are a few way I can think of to get the neck block back into position. I'm s..."

Jim Bancroft replied Mar 31 to Martin body cracked along fingerboard, one side only

12 Apr 3
Reply by David Houchens
thefishinmusician

"You need to remove the neck to get complete access to the neck block. You probably..."

Jim Bancroft replied Mar 31 to Martin body cracked along fingerboard, one side only

12 Apr 3
Reply by David Houchens
Colin Brown

"Don't quit understand what you are doing with the fingerboard? But, if it has no f..."

Jim Bancroft replied Mar 31 to stained fingerboard

7 Apr 3
Reply by Mark Tripp
  • First
  • Previous
  • Next
  • Last
  • Page 1 of about 20

RSS

© 2009   Created by Frank Ford on Ning.   Create Your Own Social Network

Badges  |  Report an Issue  |  Privacy  |  Terms of Service