I am in need of 1 bushing

I am looking for a single bushing and am wondering if someone here might have 1 to either sell or trade. I have been looking on ebay for a while and have not had luck tracking down a mate to the 5 others. The bushing is 7/16 from end to end and it is a dome shape. I have lots of bushings of different age periods and makes and would be happy to either trade, or simply buy if anyone has one of these lying around. Stupidly, I did not measure the inner diameter of the hole, but I do have some pictures of it.

Attachments:

bush_1.jpg, 260 KB
bush_2.jpg, 239 KB
bush_3.jpg, 257 KB

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Paul Verticchio on September 20, 2011 at 6:40pm

Matt,

I checked at the shop today. All I could find in that style are small bushings for mando's.

I was only able to search about 20 minutes as it was a busy day on the bench. Given that Jim seems to have taken care of your request, do you need me to look again (he probably has 30 lbs. of bushings) on Thursday?

Thx, Paul

Permalink Reply by Matt Haugen on September 20, 2011 at 8:55pm