FRETS.NET

Bob Gaddis's Discussions (132)

Search Forum

View

Discussions Replied To (112) Replies Latest Activity

"You can use it, but be aware that it is not as durable as rosewood, maple or ebony.…"

Bob Gaddis replied Sep 10, 2008 to Eastern walnut as a fingerboard material?

 5 Jun 1, 2009
Reply by Russell Vance

"Read the book "The E-Myth" before you hang out your shingle. It will give you some i…"

Bob Gaddis replied Sep 10, 2008 to Any tips on starting a repair/retail shop

 5 Sep 11, 2008
Reply by East Side Guitar Repair

"That's one of the best uses of an Ovation I've seen. I like it!"

Bob Gaddis replied Aug 23, 2008 to Show your latest thing!

 92 Dec 30, 2011
Reply by William F.Eden

"Don't they call those arch-tops?"

Bob Gaddis replied Aug 18, 2008 to No Bracing?

 3 Aug 18, 2008
Reply by Bob Gaddis

"I have a Guild 12-string in my shop that I have been procrastinating a neck re-set.…"

Bob Gaddis replied Aug 18, 2008 to Gibson non-tapered neck dovetails...Aaargh!

 5 Aug 24, 2008
Reply by C Herb Hickman

"Well...it is a Harmony. It won't ever sound like a Martin or Gibson.Not that it's a…"

Bob Gaddis replied Aug 18, 2008 to bridge replacement

 14 Aug 21, 2008
Reply by Simon Bancroft

"I did a gonzo repair on a d-28 years ago that had the entire top shear out under the…"

Bob Gaddis replied Aug 17, 2008 to bridge replacement

 14 Aug 21, 2008
Reply by Simon Bancroft

"The pipe has to be heavy enough to hold heat evenly and not flex when you apply pres…"

Bob Gaddis replied Aug 11, 2008 to Bending Black Walnut

 20 Jun 1, 2009
Reply by Steve Frost

"The bowl-back presents some clamping problems for sure. Have you considered using 1"…"

Bob Gaddis replied Aug 6, 2008 to Ovation Neck Re-set

 12 Dec 4, 2011
Reply by William F.Eden

"If you have a neck with a heel already cut for your flange profile, THAT will dictat…"

Bob Gaddis replied Aug 6, 2008 to Drilling Co-Ordinator Rod holes

 2 Aug 6, 2008
Reply by Bob Gaddis

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service